Front wiper blades are typically 22 inches on the driver’s side and 18 inches on the passenger’s side, with a 12-inch rear blade. Check your specific vehicle or owner's manual for the exact fit, as regional variations or aftermarket replacements may differ slightly.
Overview of front wiper sizes
The 2001 Honda CR-V uses two different front blade lengths to optimize visibility across the windshield. This is common among Honda models from that era. Use the measurements below as a general guide, but always verify with the blade you remove or the owner’s manual.
- Driver's side: 22 inches
- Passenger's side: 18 inches
These lengths cover most 2001 CR-V units, though some regional specifications or aftermarket replacements may use a 19-inch passenger blade. If in doubt, measure the blade currently on the vehicle and order the same length.
Rear wiper blade size
The rear window on the 2001 CR-V uses a single, shorter blade. The typical length for this rear blade is about 12 inches.
- Rear blade: 12 inches
Always confirm by inspecting the existing rear blade or consulting the owner’s manual, as there can be slight variations by market or production run.
Tips for selecting and replacing blades
When shopping for replacements, prioritize blades that match the listed lengths (22" driver, 18" passenger front; 12" rear). Consider blade type (framed vs. frameless), climate conditions, and durability. OEM-recommended or reputable aftermarket blades will ensure proper fit and performance after installation.
Summary
For a 2001 Honda CR-V, plan for front blades around 22 inches on the driver’s side and 18 inches on the passenger’s side, plus a 12-inch rear blade. Always verify the exact sizes before purchasing by measuring the current blades or consulting the owner’s manual, as there can be minor regional variations.