Most Ford Taurus models use 24-inch driver-side and 19-inch passenger-side front wiper blades, with no rear wiper on standard sedans. Always confirm for your exact year and market, as sizes can vary by generation and trim.
Current-generation Taurus (2010–2019)
The sizes listed below reflect the front wipers for the modern Taurus lineup. Note that there is typically no rear wiper on these sedans.
- Driver-side front blade: 24 inches
- Passenger-side front blade: 19 inches
These sizes cover the vast majority of 2010–2019 Tauruses, but regional differences or factory tweaks can occur. If in doubt, check your owner’s manual or the current Ford parts catalog for your VIN.
How to verify for your exact vehicle
Use reliable sources such as the owner's manual, the Ford parts site, or a trusted auto parts retailer by entering your vehicle’s year, trim, and VIN to confirm the precise blade lengths.
Earlier Taurus generations (pre-2010)
Wiper blade sizes vary more across older Taurus models (1986–1995 and 1996–2007). Front driver blades are typically in the low-to-mid 20s inches, while passenger blades are commonly in the high teens to around 20 inches. Rear wipers are not standard on many Taurus sedans of these eras, though some versions may have had a rear blade.
- Front driver blade: commonly 22–24 inches (varies by year)
- Front passenger blade: commonly 18–20 inches (varies by year)
Because exact sizes differed by model year and market, verify with the manual or a parts supplier using your Taurus’ year and trim to get the correct lengths.
Summary: For the modern Ford Taurus (2010–2019), plan on 24" driver and 19" passenger front wiper blades, with no rear wiper on standard sedans. Older Tauruses varied more, so always confirm by year and VIN to ensure accuracy.


