For most Chrysler 300 sedans, the front wipers use a 24-inch driver-side blade paired with a 19- to 20-inch passenger-side blade, plus an 11-inch rear blade. Exact sizes can vary by year, trim and whether you have the base sedan or a variant, so check your owner’s manual or a parts diagram to be sure.
This article explains the typical sizing and how to confirm the right blades for your specific car. We cover front blade sizes, rear blade size, and practical steps to verify the correct replacement for your VIN.
Front wiper blade sizes
Front wiper sizes are the most commonly replaced, and most Chrysler 300 models follow a two-blade setup on the windshield. The sizes below reflect common configurations across several model years.
- Driver-side (left) blade: 24 inches
- Passenger-side (right) blade: typically 19 or 20 inches (varies by year/trim)
These sizes are typical for the Chrysler 300's front wipers; differences by year or trim may occur, so always verify with your specific vehicle documentation or by measuring the blade you remove.
Rear wiper blade size
Most Chrysler 300 models with a rear window also use a single rear wiper blade. The standard length is approximately 11 inches, though some model years used slightly different lengths based on the tailgate design.
- Rear blade: about 11 inches (varies slightly by year)
Again, for exact fit, confirm using your owner's manual or an OEM parts catalog for your VIN.
How to confirm the right size for your Chrysler 300
When in doubt, consult official sources or have a professional verify the correct blades. The steps below help you confirm the exact sizes for your vehicle.
- Check the owner's manual or a factory parts diagram for your model year and trim.
- Inspect the blade currently installed and measure its length from end to end (including any curved sections).
- Provide your VIN to a dealership parts desk or an online parts retailer to fetch the exact blade sizes for your car.
Verifying sizes by VIN ensures you get the exact replacement blades, including compatible attachment styles and connector types.
Model-year variations to keep in mind
While the general front sizes of 24 inches and 19–20 inches apply to many Chrysler 300s, there are exceptions across production years. If your car is a performance or high-trim variant, or if it falls in a transition year, sizes may differ slightly.
In short, always confirm with a reliable source if you rely on precise fit, especially you’re replacing blades in bulk across different cars or for a dealership inventory.
Summary
Chrysler 300 wiper blade sizes are primarily a 24-inch driver-side front blade and a 19- to 20-inch passenger-side front blade, with an 11-inch rear blade in most configurations. Exact sizes can vary by year, trim, and whether you need front or rear blades. To ensure an exact fit, check your owner’s manual, inspect the blade you’re replacing, or use your VIN to pull the correct specifications from an official parts catalog. Regular replacement keeps visibility clear and safety high on the road.