Front driver-side blade: 26 inches; front passenger-side blade: 17 inches; rear blade for the hatch: 12 inches. These sizes fit most 2019 Rogue models, though exact fit can vary by trim or aftermarket replacements.
Wiper blade sizing for the 2019 Nissan Rogue follows a common pattern among Nissan SUVs: two different front blade lengths and a separate rear blade. To ensure optimal contact with the windshield and clear visibility in all weather, use the recommended sizes and verify them before purchasing. When in doubt, consult the owner's manual or a parts professional to confirm the exact fit for your vehicle's specific configuration.
Front wiper blades
The front blades are the most frequently replaced components and are typically sized as a pair of distinct lengths to optimize sweep coverage on the Rogue’s windshield.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
Using the recommended front blade lengths helps ensure full windshield coverage and reduces streaking at the sweep edges. If you replace both blades with a uniform length, you may still achieve good results, but the cited sizes are the standard specification for the 2019 Rogue.
Rear wiper blade
The Rogue’s rear window wiper is a separate component and is commonly sized at 12 inches for the hatch window, though some variations may exist by market or trim.
- Rear blade: 12 inches
When replacing the rear blade, confirm the length shown on the blade itself or in the vehicle documentation. Some aftermarket options may list 11 inches or 12 inches; matching the correct size is important for proper clearing performance on the rear window.
How to verify your exact sizes
If you want to be 100% sure of the correct blade sizes for your 2019 Rogue, follow these steps to verify.
- Check the owner's manual for the recommended blade lengths for the front and rear wipers.
- Inspect the existing blades for size markings, which are usually printed on the blade's spine or packaging.
- Measure the blades directly: remove the blade, lay it along a ruler or tape measure, and note the full length.
- Use your Vehicle Identification Number (VIN) or year/make/model to look up OEM part numbers on Nissan’s official site or a trusted parts retailer.
- Ask a professional at a parts counter or service shop to confirm the exact sizes for your specific Rogue configuration.
Verifying through multiple sources helps prevent ordering mistakes, especially if your Rogue has a regional variant or aftermarket trim. Accurate sizes improve visibility and reduce streaking during rain or snow.
Summary
For a 2019 Nissan Rogue, plan on front driver-side blades at 26 inches and front passenger-side blades at 17 inches, plus a rear blade of about 12 inches. Always verify with the manual or a trusted parts source, since exact sizes can vary by trim or market. By sticking to these specifications, you’ll maintain clear visibility and optimal wiper performance in varied weather.