Front blades: 26 inches on the driver’s side and 18 inches on the passenger side; the rear blade is 12 inches.
For the 2016 CR-V (fourth generation), these sizes are standard in most regions. Always verify by checking your owner’s manual or measuring the blades currently on the vehicle to ensure a precise fit, as regional variations or trim differences can occur.
Front Wiper Blades
The front wipers operate as a two-blade system, with different lengths to match each side of the windshield. Use the following standard sizes when shopping for replacements.
- Driver's-side blade: 26 inches
- Passenger-side blade: 18 inches
Choosing the correct lengths ensures full windshield coverage and proper operation within the wiper arm housings. If you’re unsure, consult the owner’s manual or confirm with an auto parts retailer by vehicle year and model.
Rear Wiper Blade
The 2016 CR-V uses a single rear wiper blade for the hatch window. Use the size listed below when replacing the rear blade.
- Rear blade: 12 inches
When replacing, ensure the rear blade is designed for the CR-V’s rear wiper arm and mounting style to guarantee proper sweep and alignment.
Verification and Compatibility Tips
How to confirm the right size
If you’re uncertain, remove the blades and check for the length printed on the edge of the blade. You can also measure from the blade’s center to the tip. For peace of mind, bring the old blades or the vehicle’s VIN to an auto parts retailer to obtain an exact match.
Summary
In short, the 2016 Honda CR-V typically requires a 26-inch driver-side front blade, an 18-inch passenger-side front blade, and a 12-inch rear blade. Always double-check with the owner’s manual or an experienced parts advisor to account for any regional or trim-specific variations, and consider OEM or high-quality aftermarket options for best performance.