The front wipers are typically 26 inches on the driver’s side and 17 inches on the passenger side, with a 12-inch rear blade. Exact sizes depend on model year and trim, so verify against your vehicle’s manual or by measuring the blades.
Wiper blade sizes don’t change often, but Highlander generations have shifted over time. This guide outlines the common front and rear blade sizes, how to confirm your exact lengths, and tips for shopping replacements.
Front Wiper Blade Sizes
Most Highlanders use two front blades of different lengths. Knowing these dimensions helps you buy a correct pair and avoid fit issues.
- Driver-side front blade: 26 inches (typical for most Highlander generations)
- Passenger-side front blade: 17 inches (typical for most Highlander generations)
These measurements cover the majority of Toyota Highlander models from the mid-2000s to today. Always confirm against your model year if you’re shopping for replacements.
Rear Wiper Blade Size
The Highlander also uses a rear wiper blade on most hatchback SUVs. The rear blade is commonly 12 inches, but some model years may use a slightly different length. Check your owner’s manual or measure the blade to be sure.
- Rear blade: 12 inches (typical for many Highlander generations)
When shopping, it’s wise to carry the exact blade length or the vehicle year/model to ensure you pick the correct rear blade.
How to Find Your Exact Size
Because there were multiple Highlander generations with different blade lengths, the most reliable method is to verify your specific year and trim. Here are practical steps to confirm.
- Check the owner’s manual under the maintenance or wipers section for blade sizes.
- Inspect the current wiper blades for etched length marks or the part number stamped on the blade or its adapter.
- Measure the blade itself by removing it and using a tape measure to read the total length from end to end.
- Consult an official Toyota parts catalog or retailer with your vehicle’s year, make, and model to confirm the exact replacement sizes.
- If in doubt, bring the current blade to an auto parts store; staff can confirm the correct size and show compatible blade styles (framed vs. beam, etc.).
Correct sizing isn’t just about fit—it also affects wipe quality and visibility in bad weather. When in doubt, rely on the manual or professional guidance to avoid buying an incorrect size.
Summary
For most Toyota Highlanders, expect front blades of 26 inches on the driver side and 17 inches on the passenger side, with a 12-inch rear blade. However, sizes vary by year and generation. Always verify using the owner’s manual, the blade label, or a trusted parts retailer to ensure you purchase the right replacements. Accurate sizing improves visibility and safety on the road.