Front wiper blades on most Toyota Highlanders are 26 inches on the driver's side and 17 inches on the passenger side; the rear blade is usually 12 inches.
Note that sizes can vary by model year and market, so it’s wise to verify for your exact vehicle using your owner’s manual or an online parts tool before purchasing replacements.
Front windshield wiper sizes
Before listing the typical sizes, keep in mind that the following guidance reflects the most common configurations for US-market Highlanders. Variations can occur by year, trim, or regional market. Always confirm against your vehicle or parts specification tool.
- Most Highlanders sold in the United States from the late 2000s through today use a 26-inch blade on the driver’s side and a 17-inch blade on the passenger side for the front wipers.
- Some older models, regional variations, or special configurations may differ slightly; if in doubt, check the OEM specification for your exact year and trim or measure your current blades.
In practical terms, when replacing front blades on a typical Toyota Highlander, start with a 26" driver-side blade and a 17" passenger-side blade, then verify fitment with the arms and adapter type on your vehicle.
How to verify the exact front blade size for your Highlander
To ensure you get the correct size, you can:
- Check your owner's manual or the official Toyota parts catalog for your exact model year.
- Measure the current blades from end to tip, or remove one blade and read the size stamped on it.
- Use an online parts tool by entering year, make, and model to pull the correct blade length recommendations.
Once you have the correct front blade lengths, you can purchase accordingly and select compatible adapters if needed.
Rear windshield wiper size
The rear wiper blade for most Toyota Highlander models is typically 12 inches in length. However, this can vary by year or trim, so it’s important to confirm the exact size for your specific vehicle.
- Common rear blade length: 12 inches for many Highlander models.
- Verify by checking the blade itself, the owner’s manual, or an OEM parts lookup tool for your year and trim.
After confirming, you can replace the rear blade with the same length or a compatible aftermarket option designed for Highlander rear wipers.
Tips for accurate replacement decisions
When shopping for wipers, consider blade technology (beam vs. traditional), climate considerations (winter weather may benefit from winter-ready blades), and easy-to-install adapters. Always double-check compatibility with your specific Highlander year and trim before purchase.
Summary
For most Toyota Highlanders, plan for 26" driver-side front blades and 17" passenger-side front blades, with a rear blade around 12". Because sizes can vary by year, market, and trim, always verify using your owner’s manual or a trusted parts lookup tool before buying replacements. Measuring your current blades or checking the OEM specification ensures you get the right fit every time.