Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size windshield wipers for Subaru Legacy?

Typically, the front wipers on a Subaru Legacy are 26 inches on the driver’s side and 17 inches on the passenger side, with a rear wiper around 12 inches. Exact sizes can vary by model year and trim, so it’s best to verify your specific car’s needs using the manual or a fitment tool.


Front wiper blade sizes by Legacy generation


This section outlines the common front blade configurations used across different Legacy generations. Keep in mind that regional variations or trim-specific differences may apply.



  • Pre-2015 Legacy: commonly 26 inches (driver) and 17 inches (passenger); rear around 12 inches.

  • 2015–2019 Legacy: typically 26 inches (driver) and 17 inches (passenger); rear around 12 inches.

  • 2020–present Legacy: most models maintain a 26-inch driver blade with the passenger side in the 16–18 inch range; rear around 12 inches.


In short, 26" on the driver side is standard for most recent Legacy models, with the passenger side typically between 16" and 18" depending on year and trim. Always confirm for your exact vehicle.


Rear wiper sizes in the Legacy lineup


Rear wiper sizing is generally smaller and more uniform, but there are exceptions depending on year and market.



  • Most modern Legacy sedans equipped with a rear wiper use about a 12-inch blade.


Note that some older Legacy trims or regional versions may have different rear wiper configurations, or in rare cases, no rear wiper at all. Verify for your exact model.


How to confirm the exact size for your Subaru Legacy


To ensure you purchase the correct blades, follow these steps to verify size for your specific car:



  1. Check the owner's manual for the recommended blade lengths for front and rear wipers.

  2. Inspect the current blades for length markings or a part number; the length is often printed on the blade itself.

  3. Measure the blades with a tape measure if you’re replacing them yourself—remove the blade and measure along the edge from tip to tip.

  4. Use a vehicle fitment tool on an auto parts retailer’s website by entering your year, trim, and engine to pull exact sizes.


Following these steps will help you select blades that fit properly and perform reliably in the seasons ahead.


What to consider when replacing wipers


Beyond length, consider blade type (beam vs. traditional frame), climate, and driver visibility. Beam blades tend to offer better performance in rain and snow, while some older Legacy models may work well with traditional frames. Also, check for compatibility with your vehicle’s wiper arm design and any adapters that might be required.


Summary


For most Subaru Legacy models, plan for a 26-inch driver-side blade and a passenger-side blade in the mid-to-high teens (roughly 16–18 inches), with a typical rear blade around 12 inches. Because sizes vary by year, trim, and market, consult your owner's manual or a reputable fitment tool to confirm the exact lengths for your specific vehicle. Regular verification helps ensure optimal visibility and safe driving in all weather.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.