The front blades are typically 26 inches on the driver’s side and 16 inches on the passenger’s side, with an 11-inch rear blade. This guide lays out the standard sizes and how to confirm them for your specific 2020 Honda Fit.
Wiper sizes can vary by trim or aftermarket replacements, so it’s wise to double-check before buying. The safest approach is to verify with your owner's manual or by measuring the blades currently installed on your car.
Front wipers: standard sizes
Replacement blades for the front windscreen on a 2020 Honda Fit most often come in two sizes: 26 inches on the driver’s side and 16 inches on the passenger’s side. These measurements apply to the GK5 generation and are common across most trims, though it’s always best to confirm for your vehicle.
- 26-inch driver-side blade
- 16-inch passenger-side blade
When buying, ensure your blades match the mounting type on your wiper arms (frame vs. beam) and use the correct connector for your model. If you’re unsure, check the owner’s manual or measure the blades currently installed on the car.
How to verify sizes on your car
To confirm the correct sizes without pulling anything apart, follow these steps:
- Lift each blade and check for a length label on the blade itself.
- Measure the full blade length from tip to base with a tape measure if there’s no label.
- Compare your measurements with the sizes listed in the owner’s manual or on Honda’s official parts site.
Accurate verification helps prevent streaks, chatter, or poor contact with the windshield, especially in adverse weather.
Rear wiper: size and considerations
The rear window wiper on most 2020 Fits is typically 11 inches, though some aftermarket blades may use a 12-inch option depending on the arm design and connector. Always confirm the rear blade size for your exact vehicle configuration.
- 11-inch rear blade (common for most 2020 Fits)
When replacing the rear blade, check that the blade’s attachment matches the rear wiper arm’s connector and that the blade sweeps cleanly across the glass without rubbing or skipping.
How to verify the rear wiper size
Use a similar verification approach as the front blades: check the blade for a size label, measure the blade length, and compare with the owner’s manual or Honda’s parts guidance. If you’re replacing with an aftermarket blade, ensure it includes the correct adapter for your rear arm.
In practice, most 2020 Honda Fits use a 26" / 16" front blade setup with an 11" rear blade. If you’re unsure, bring the old blades to an auto parts store or use the VIN to pull exact parts compatibility online.
Summary: For a 2020 Honda Fit, the standard front wipers are 26 inches on the driver’s side and 16 inches on the passenger’s side, with an 11-inch rear wiper. Always verify on your specific vehicle by checking the owner’s manual or measuring the blades, and choose blades that match your mounting style and connector type for best performance.