For a 2017 Toyota Tundra, the standard front windshield wipers are typically 26 inches on the driver’s side and 20 inches on the passenger’s side. This pairing covers most trims and cab configurations, but exact sizes can vary by cabin type or aftermarket replacements.
Front wiper blade sizes
The sizes listed below reflect common factory and replacement options for 2017 Tundra models. Always verify against your vehicle or the manual.
- Driver-side blade: 26 inches
- Passenger-side blade: 20 inches
Note that some sources list minor variations depending on whether the Tundra has an Access Cab or CrewMax configuration, and aftermarket suppliers may offer different lengths. When in doubt, measure the current blades or bring the blade to a parts retailer to match.
Rear window wiper and other notes
Most 2017 Toyota Tundra models do not come equipped with a rear window wiper. If your truck has a rear wiper (an unusually rare option or modification), sizes vary and you should refer to the vehicle's manual or the part listing for the correct length.
How to confirm the correct size
To ensure you buy the right blades, you can:
- Check the owner's manual or Toyota's official parts site for your exact VIN or trim level.
- Measure the current blades from tip to base (in inches) on both sides.
- Visit a parts retailer with your vehicle's year, make, model, and cab configuration; they can look up the exact size by VIN or test-fit the blades.
With the right sizes, you’ll have optimal contact against the windshield and clear visibility in rain or snow.
Summary: For a 2017 Toyota Tundra, the standard front wipers are typically 26 inches on the driver’s side and 20 inches on the passenger’s side. Check your specific cab configuration and confirm with the manual or retailer if you have a non-standard setup. There is usually no rear window wiper on this model, but verify if yours has one due to optional equipment or modifications.


