The 2007 Honda Fit typically uses a 24-inch driver-side front blade, a 16-inch passenger-side front blade, and a 10-inch rear blade if your car is equipped with a rear wiper.
Front wiper blade sizes
Two lengths are used on the front to fit the curved windshield. The following sizes are standard for most 2007 models:
- Driver-side (left): 24 inches
- Passenger-side (right): 16 inches
These front sizes are most commonly used on the 2007 Honda Fit. Always verify against your vehicle or parts listing if you notice any mismatch.
Rear wiper blade size
The rear window uses a smaller blade. If your Fit is equipped with a rear wiper, expect the blade to be about 10 inches long.
- Rear blade: 10 inches
Note that some early or regional trims may omit a rear wiper entirely, so check your car’s configuration before purchasing a rear blade.
How to verify and replace
To be certain, consult the owner’s manual or remove and measure the existing blades from tip to tip. When shopping, many retailers label blades by vehicle year, make, and model, listing the 24" front driver, 16" front passenger, and 10" rear options for the 2007 Fit. Blades come in conventional (frame) or beam designs, and both sizes are available for front and rear, though the rear kit is typically just the single 10" blade.
When replacing, ensure the connector style matches your old blades (hook, side pin, or universal adapters). If you’re unsure, bring the old blade to the store to compare or ask a staff member to verify fit.
Summary
In short: the 2007 Honda Fit normally uses 24-inch driver-side and 16-inch passenger-side blades for the front, and a 10-inch blade for the rear, provided the car has a rear wiper. Always confirm with your owner’s manual or a parts guide for your exact trim, especially if you’re unsure about the rear wiper’s presence.


