For the 2009 Honda CR-V, the front wipers are 26 inches on the driver’s side and 17 inches on the passenger side, with an 11-inch rear wiper. This combination fits the vehicle’s windshield geometry and factory mounts.
Front wiper blade sizes
The two front blades are different lengths to cover the driver’s and passenger’s viewing areas. The standard sizes that fit most 2009 CR-V models are listed below. If you’re replacing aftermarket blades, always verify compatibility with your specific trim and year.
- Driver’s side: 26 inches
- Passenger side: 17 inches
Using the correct front blade sizes ensures full coverage and effective wiping across the windshield. If your current blades differ, double-check the model year, trim, or any regional variations that might affect compatibility.
Rear wiper blade size
The rear window uses a single, smaller blade designed to fit the hatch area without obstruction. The standard size for the 2009 CR-V is 11 inches.
- Rear wiper blade: 11 inches
Note that some regional or aftermarket options might vary slightly. If in doubt, measure the existing blade or consult the owner’s manual for exact specifications.
Additional considerations
Choosing blade type and installation tips
Beyond length, blade construction matters. Beam blades often provide better contact in colder or icy conditions, while traditional blades can be more economical. Replacement intervals typically range from 6 to 12 months depending on climate and usage. Ensure you select a compatible connector style for the CR-V’s wiper arms and replace both front blades at the same time to maintain even performance.
When installing, remove the old blades carefully and align the new ones with the mounting arms to avoid damage. If you’re unsure about compatibility, bring the old blade or the wiper arm connector to a parts retailer for a precise match.
Summary
In short, the 2009 Honda CR-V requires 26-inch driver-side front wipers, 17-inch passenger-side front wipers, and an 11-inch rear wiper. Verify these sizes with your manual or measurements, especially if you have a non-standard trim or aftermarket parts, and consider blade type and climate when selecting replacements.