Most Honda CR-V models in recent years use a 26-inch blade on the driver’s side and a 17-inch blade on the passenger side, though exact sizes can vary by year and trim. To be sure, check your owner’s manual, the blade packaging, or measure the blades currently installed on your car.
Front-wiper sizes by model year
Fifth generation (2017–present)
The current generation commonly uses a 26-inch driver-side blade and a 17-inch passenger-side blade. Some trims or regional variants may use an 18-inch passenger blade, so it’s best to confirm for your specific vehicle.
Before listing the sizes, note the typical pairing for this generation.
- Driver side: 26 inches
- Passenger side: 17 inches (some models may use 18 inches)
Confirming the exact size for your CR-V will ensure optimal coverage and performance of the wipers across all weather conditions.
Fourth generation (2012–2016)
For most 2012–2016 CR-V models, the common pairing is 26 inches on the driver side and 18 inches on the passenger side.
Common sizes for this generation, used as a reference point when shopping or replacing blades.
- Driver side: 26 inches
- Passenger side: 18 inches
Always verify the exact sizes for your specific vehicle, as regional variations or trim packages can differ.
Third generation (2007–2011)
Earlier CR-V models in the third generation typically used a 24-inch driver-side blade and a 19-inch passenger-side blade, though some markets may have slight variations.
These sizes can help you narrow down replacement options for older CR-Vs.
- Driver side: 24 inches
- Passenger side: 19 inches
Because sizes can vary by year and region, always confirm before purchasing replacements.
How to confirm the exact size for your CR-V
To avoid guessing, use these steps to verify the correct wiper blade sizes for your specific vehicle.
- Check the owner’s manual or the vehicle’s maintenance section for the recommended blade sizes.
- Inspect the packaging of the blades currently installed or the replacement blades you’re considering—blade packaging usually lists the sizes.
- Measure the existing blades with a tape measure from tip to tip on each blade’s edge to confirm lengths.
- Consult your local Honda dealer or a trusted auto parts retailer with your VIN for exact OEM sizes.
Once you have the precise measurements, you can choose the correct replacement blades and ensure proper fit and performance for your driving conditions.
Summary
In general, modern Honda CR-Vs use a 26-inch driver-side blade and a 17-inch passenger-side blade, with some older generations using 24/19 or 26/18 configurations. Because sizes vary by year, generation, and region, always verify against your manual, blade packaging, or a dealer to ensure an exact match. When in doubt, bringing the old blades to a parts store for a quick side-by-side comparison is a reliable way to buy the correct replacement.
What size wiper blades for a 2019 Honda CR-V?
2019 Honda CR-V Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2019 Honda CR-V | 26 in. | 17 in. |
What size wiper blades for a 2018 Honda CR-V?
2018 Honda CR-V Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2018 Honda CR-V | 26 in. | 17 in. |
What size wiper blade does a 2020 Honda CRV take?
26 in
2020 Honda CR-V Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2020 Honda CR-V | 26 in. | 17 in. |
What size wiper blades does a Honda CRV use?
Honda CR-V Windshield Wipers
It's common to replace your wipers once a year, and sometimes even more often. For your compact crossover, the front wipers are generally 26 inches on the driver's side and 17 inches on the passenger side, though it's always good to check exact sizing for your model year.