For a 2019 Honda Accord, use a 26-inch wiper on the driver's side and a 16-inch wiper on the passenger side.
That sizing is standard for most US-spec 2019 Accord sedans. Always verify the exact fit for your trim and market by checking the owner’s manual or a reputable parts guide before purchasing blades.
Standard blade sizes for the 2019 Accord
Use these lengths as the baseline when shopping for replacement blades. This pairing covers the majority of 2019 Accord sedans sold in the United States.
- Driver's side blade: 26 inches
- Passenger side blade: 16 inches
Note that regional variations or unusual trims may differ, so it’s wise to confirm with your vehicle’s documentation or an official parts finder.
How to confirm the exact fit for your car
To ensure you order the correct blades, follow these verification steps. This helps avoid ordering the wrong size if there are regional differences or special equipment.
- Consult the owner's manual or the door jamb sticker that sometimes lists blade sizes.
- Inspect the current blades for length markings or a model number that can be matched to a fit guide.
- Use a reputable parts retailer’s fit guide by entering year, make, model, and trim (or vehicle identification number).
- Ask a parts counter staffer or automotive technician if you’re unsure; some markets have exceptions.
Following these checks will help ensure you purchase blades that fit securely and perform well in adverse weather.
Tips for choosing blades and installation basics
Blade types and brand recommendations
Beyond length, blade construction matters. Silicone blades last longer and resist cracking in sun exposure, while conventional rubber blades are usually less expensive. Popular aftermarket options for the 2019 Accord include Bosch Icon, Rain-X Latitude, Valeo 600 Series, and Michelin Stealth UltiCare. Consider climate, driving conditions, and budget when choosing.
Simple installation steps
Installing new blades is typically straightforward. Here’s a quick guide to a standard insert-style blade for the 2019 Accord:
- Lift the wiper arm away from the windshield until it stays upright.
- Release the old blade by pressing the tab or lever on the blade’s connector and slide it off the wiper arm.
- Attach the new blade’s connector to the arm, ensuring it clicks or locks into place.
- Lower the wiper arm back against the windshield and test a quick wipe to confirm proper operation.
If you have a different blade mounting system (e.g., pin-type vs. hook-type), follow the specific installation instructions provided with your replacement blades. Always recycle old blades responsibly.
Summary
In short, the typical blade sizes for a 2019 Honda Accord sedan are 26 inches on the driver’s side and 16 inches on the passenger side. Use this as your starting point, but verify with your manual or a fit guide for your exact trim and market. When choosing blades, consider silicone for longevity and reliability, and select a trusted brand. Proper installation ensures optimal visibility and safety in all weather.