Front wiper blades are 26 inches on the driver’s side and 20 inches on the passenger’s side, with a 12-inch rear wiper blade.
The 2020 Ford Explorer uses these standard blade lengths to cover the windshield and rear window effectively. This article breaks down the exact sizes and provides practical guidance for replacement and maintenance to ensure clear visibility in varied weather conditions.
Front windshield wipers
The two front blades are sized to cover the main windshield area and balance the sweep across the glass. Use these references when shopping for replacements.
- Driver's side blade: 26 inches
- Passenger's side blade: 20 inches
These are the standard front blade sizes for a 2020 Explorer. If you replace with aftermarket blades, ensure you select the exact lengths to maintain proper contact and park position.
Rear windshield wiper
The rear window wiper on the 2020 Explorer uses a single blade length to clear the rear glass. The typical size is 12 inches.
- Rear blade: 12 inches
Notes: Some trims or regional variations may have different rear blade mounts. When in doubt, verify by checking the label on the current blade or consulting the owner's manual.
Replacement tips
If you plan to replace the blades yourself, follow these steps to ensure a proper fit and safe operation.
- Identify the correct sizes: front 26" (driver) and 20" (passenger); rear 12".
- Purchase compatible blade types (beam vs traditional). Beam blades are common for modern vehicles and often recommended for the Explorer.
- Prepare and park the vehicle. Turn off the ignition and remove the key if applicable.
- Lift the wiper arm and remove the old blade by releasing the locking tab or pin.
- Attach the new blade, align the connector, and re-seat it until the locking mechanism clicks.
- Lower the arm gently and test with the washer function to confirm coverage and no streaking.
After installation, inspect for even contact along the blade length and replace if you notice streaking or skipping.
For additional confirmation, consult the owner's manual or contact a Ford parts specialist with your vehicle’s VIN to ensure exact size compatibility.
Summary: The 2020 Ford Explorer typically uses 26-inch driver-side front blades, 20-inch passenger-side front blades, and a 12-inch rear blade. Always verify the sizes before purchasing to ensure a precise fit and optimal performance.