Rotor sizes vary by trim and brake package. For the 2013 Avenger, plan for front rotors near 12 inches in diameter and rear rotors around 10–11 inches, but you should confirm exact numbers using your vehicle’s VIN and the OEM parts catalog.
Understanding rotor sizing on the 2013 Avenger
Rotor diameter is dictated by the front and rear braking setup and can be affected by trim level, wheel size, and optional brake packages. Getting the right size is crucial for proper pad fit, caliper clearance, and braking performance. The most reliable way to determine the exact size is to look up the vehicle’s VIN in an official parts catalog or to measure the rotors currently on the car.
What changes with trim and options
Brake rotors can vary between base models and higher trims, as well as with any performance or security options. Because those differences alter the rotor diameter, circumference, and hole pattern, always verify with a VIN-based parts lookup or by inspecting the actual rotors on the vehicle before purchasing replacements.
These ranges provide a baseline reference before you check your specific car. Front and rear rotors are sized differently, and exact specifications can vary by market and production date.
- Front rotors: approximately 11.8 to 12.0 inches (300 to 305 mm) in diameter.
- Rear rotors: approximately 10.0 to 11.0 inches (256 to 280 mm) in diameter.
These ranges are a starting point. Exact diameter, thickness, and mounting pattern must match your car’s braking system. Always confirm with a VIN-based parts lookup or by measuring the rotors on the vehicle to ensure you’re buying the correct replacements.
How to verify the exact size for your car
To ensure you buy the correct rotors, use a combination of official documentation and direct measurement. Start with the VIN to pull OEM braking specifications, then cross-check with the rotor you have or intend to purchase. If in doubt, consult a dealer or a trusted auto parts retailer.
Practical steps to obtain the exact numbers
- Find your VIN (usually on the dash near the driver's side) and use it in an official Mopar/Chrysler parts catalog or a reputable parts site.
- Check the current rotors for stamped size markings (diameter is commonly listed on the rotor edge or hub).
- Measure the rotor diameter with a tape measure or caliper if markings are unclear.
- Confirm with a dealer or qualified auto shop if you’re replacing rotors or upgrading to a different brake package.
Bottom line: rotor sizes for the 2013 Dodge Avenger depend on the specific brake package and trim. Use VIN-based catalogs and direct measurements to ensure accuracy and safe braking performance.
Summary
The 2013 Dodge Avenger typically uses front rotors around 11.8–12.0 inches in diameter and rear rotors around 10–11 inches, but exact sizes vary by trim and options. Always verify with your VIN and official parts data, or measure the rotors directly, to ensure you purchase the correct replacements for safe, effective braking.
How do I tell what size my rotors are?
Remove the wheel to expose the rotor. Measure the Rotor Diameter: Use a tape measure or a caliper tool to measure the diameter of the brake rotor from edge to edge through the center. Make sure to measure the largest possible diameter.
What size rotors does a 2013 Dodge Avenger have?
2013 Dodge Avenger With 295mm Front and 262mm Rear Rotors.
Why does the 08 Dodge Avenger have two different size Front rotors?
The 10.31 inch rotors are for the 2 wheel drive models and the 11.89 inch rotors are for the all-wheel drive models. They are not interchangeable. You have to use the size specific to your vehicle. There can be significant differences in how the brakes are mounted between front and all-wheel drive models.
What is the specs of a 2013 Dodge Avenger?
A 173-horsepower, 2.4-liter four-cylinder engine is standard, and it works with either a four- or six-speed automatic transmission, depending on the trim level. The optional 283-hp, 3.6-liter V-6 pairs with a six-speed automatic. Mechanical features include: Front-wheel drive.