The 2010 Honda Odyssey Touring wears 17-inch alloy wheels. This trim level typically ships with 17‑inch rims paired with P235/65R17 tires, setting it apart from lower trims that use smaller wheels. This article outlines the official setup and what to know if you’re inspecting, replacing, or upgrading the wheels.
Rim size and tire details
Before listing the factory specifications, note that the Touring trim’s standard wheel size is 17 inches. The following details describe the primary wheel and tire configuration for this variant.
- Rim diameter: 17 inches
- Rim type: alloy
- Tire size: P235/65R17
- Bolt pattern: 5x114.3 mm
These specifications reflect the common factory setup for the 2010 Odyssey Touring in the U.S. market, providing a balance of ride comfort, load capacity, and highway stability.
Differences from other trims
Understanding how the Touring’s wheels compare to other trims helps buyers and owners avoid confusion when shopping for replacements or inspecting a vehicle.
- Base and EX trims typically use 16-inch wheels
- Touring uses 17-inch alloy wheels
- Tire size commonly remains around P235/65R17 on Touring, aligning with the 17-inch rim
Conclusion: If you’re replacing wheels or shopping for a used Touring, verify that the vehicle has 17-inch alloy rims and the matching P235/65R17 tires, with the correct 5x114.3 mm bolt pattern.
Notes on fitment and upgrades
For owners considering aftermarket rims or tire replacements, the following considerations help ensure proper fit and safety.
- Ensure any replacement rims are 17 inches in diameter to match the Touring’s spec
- Maintain the factory bolt pattern (5x114.3 mm) and appropriate offset to avoid clearance issues
- Center bore compatibility is important to avoid hub-centric fit problems
Conclusion: When upgrading, stick to factory-recommended specifications or OEM-approved 17-inch wheels that match the 5x114.3 mm bolt pattern and P235/65R17 tires to preserve ride quality and safety.
Summary
The 2010 Honda Odyssey Touring is equipped with 17-inch alloy rims, paired with P235/65R17 tires and a 5x114.3 mm bolt pattern. This setup differentiates it from lower trims that use 16-inch wheels and underscores the Touring’s emphasis on a balance of space, comfort, and stability. Always confirm the exact spec for your vehicle’s region and VIN when sourcing replacements or upgrades.
What size rims are on a 2010 Honda Odyssey?
Honda Odyssey 2005 2006 2007 2008 2009 2010 16" OEM Wheel Rim Mag Style Lugs. This is a 16" OEM Wheel Rim. This is an aluminum wheel with a diameter of 16" and a width of 7. This wheel has 5 lug holes and a bolt pattern of 120mm.
What is the best engine oil for a Honda Odyssey?
For the 2021 Honda Odyssey EX-L, Honda typically recommends using 0W-20 full synthetic oil. This information can usually be found in your owner's manual, which should be your first stop for accurate details. The 0W-20 designation refers to the oil's viscosity, or its resistance to flow, at different temperatures.
What year to stay away from Honda Odyssey?
The 2002 model happens to be one of the worst Honda Odyssey models, with the most reported incidents in the model's history. The primary issue (again) was the transmission, which started giving drivers problems around 109,000 miles.
What size are my factory rims?
One way to determine the rim size for your vehicle is to look at the alphanumeric tire size code located in the owner's manual, driver's side door jamb, or inside the glove box door. Look for a code like P215/65 R15 95H.