The rear wiper blade size for Infiniti FX35 is typically 12 inches in length. This size fits most FX35 models across both generations, but you should confirm for your exact year and trim by checking the owner’s manual or inspecting the blade you currently have.
Infiniti’s FX35 was produced in two generations, roughly spanning 2003–2008 (first generation) and 2009–2013 (second generation). While the common OEM length is 12 inches, variations can occur depending on tailgate design or aftermarket replacements. When shopping, use your VIN or the existing blade as a reference to ensure a proper fit.
Common size and verification
Below is the typical size used on most FX35 models. Use it as a starting point, but always confirm against your vehicle’s specifics before purchase.
- Rear wiper blade length: 12 inches (approximately 30 cm) for Infiniti FX35 across the majority of model years.
If you’re unsure, measure from tip to tip of the blade or compare the blade you remove with a 12-inch replacement to verify fit.
How to confirm and replace
Tips to confirm and replace the rear blade:
- Check the owner’s manual or OEM parts catalog for the exact blade size for your year and trim.
- Remove the old blade and measure its length, or bring it to an auto parts store for comparison.
- When purchasing, ensure you select a 12-inch blade with the correct connector type for your FX35’s rear wiper arm.
OEM or aftermarket options are widely available; brands like Bosch, Trico, and Valeo offer 12-inch rear blades compatible with many FX35 models. Always verify the connector and mounting method (hook vs. pin) before buying.
Summary: For Infiniti FX35, the rear wiper blade is typically 12 inches long. Confirm with your specific model year, trim, and the existing blade or owner’s manual to ensure a perfect fit, and choose a 12-inch blade with the correct connector when purchasing.