The rear wiper blade for the 2015 Honda HR-V is typically 11 inches long. While 11 inches is the common size, regional variations can occur, so it’s wise to double-check on your vehicle or in the owner’s manual.
Overview of the size
The HR-V’s rear window wiper is smaller than the front blades, designed to clear the compact hatchback’s rear glass efficiently. The standard size is 11 inches, though some markets may use a 12-inch blade. Always confirm by checking your current blade or the Honda parts diagram for your VIN.
How to verify the correct size
To confirm the correct length before purchasing, measure the blade when removed from the arm or compare with the blade you plan to replace. You can also consult the owner’s manual or an official parts diagram by VIN to ensure you get the right size.
Before listing options, note that blade length and connector type must match your HR-V’s wiper arm.
- Common length for the 2015 HR-V rear wiper: 11 inches (28 cm).
- Some regional models may use a 12-inch blade; verify via VIN or parts diagram.
- Connector compatibility: ensure the replacement blade’s attachment matches your wiper arm (often a standard J-hook or similar).
In summary, 11 inches is the standard size for most 2015 HR-Vs, but always confirm to avoid buying the wrong blade.
Replacement options
When replacing, you can choose OEM Honda blades or reputable aftermarket options. Both typically come in an 11-inch size for the 2015 HR-V, but connector styles vary. Check the packaging or product listing to confirm compatibility with your wiper arm.
- OEM (Honda) rear wiper blade: 11 inches, compatible with most 2015 HR-Vs.
- Aftermarket options: 11-inch blades from brands such as Bosch, Rain-X, Valeo, or Denso with a matching connector.
- Connector types: Commonly a J-hook or a pin attachment; verify the exact style on your current blade and the replacement.
If you’re unsure, ask a dealership or parts retailer with your VIN to ensure you get the exact size and connector for your vehicle.
How to replace the rear wiper blade
Replacing the rear wiper blade on the 2015 HR-V is a straightforward DIY task. The steps below describe a typical replacement process; always refer to the specific blade you buy for any model-specific instructions.
- Lift the wiper arm away from the window so it stays upright.
- Press the release tab on the blade connector and slide the old blade out of the arm.
- Attach the new blade by aligning the connector with the arm and clicking it into place.
- Lower the wiper arm back to the window and test the blade’s operation.
Test for proper contact and check for streaking. If streaking occurs, ensure the blade is fully seated or replace the rubber insert if needed.
Summary
The 2015 Honda HR-V typically uses an 11-inch rear wiper blade, with regional variations possible. To be certain, consult your owner's manual or Honda parts diagram for your VIN, or ask a dealer/parts retailer.
For drivers in regions with frequent rain or snow, keeping the rear blade properly sized and in good condition is essential for clear visibility and safe driving.