The rear wiper blade on the 2020 Honda CR-V is 11 inches long.
For 2020 CR-V owners, the rear wiper blade size is a common point of confusion because some models appear similar on the exterior but use different rear blade lengths. This guide clarifies the official size, how to verify it on your vehicle, and practical options for replacement blades, including OEM and reputable aftermarket choices.
Size specification and verification
The 2020 Honda CR-V’s rear wiper blade is designed to be 11 inches in length. This size fits the standard rear window configuration on that generation and is compatible with most 11-inch rear blades sold for Honda CR-V models from roughly 2017 through 2022. If you’re uncertain, verify by measuring the current blade or checking Honda’s parts diagrams or your owner’s manual.
Use these steps to confirm the blade length before you buy:
- Remove the blade from the wiper arm and measure end-to-end along the blade.
- Look for the length marking on the blade packaging or the blade itself.
- Cross-check the vehicle’s documentation or a Honda parts diagram for the exact specification of your build date.
With the correct size confirmed, you’ll find both OEM and aftermarket 11-inch rear wiper blades widely available from major brands.
Replacement options and selection guidance
When shopping for a replacement, you can choose between OEM blades and aftermarket options in the same 11-inch size. OEM blades guarantee a factory fit, while reputable aftermarket brands can offer competitive performance and pricing.
OEM vs aftermarket considerations
OEM rear blades are specifically designed for Honda vehicles and typically install with the same ease and fit as the original. Aftermarket blades from trusted brands can provide similar functionality at a potentially lower price. Look for blades advertised as 11-inch rear blades compatible with the CR-V and check customer reviews for durability and wiping performance in varied weather.
- OEM 11-inch rear blade: guaranteed fit and dealership availability.
- Aftermarket 11-inch blades from brands such as Bosch, Valeo, Denso, or ACDelco: broadly available at auto parts stores and online marketplaces.
- Consider features like splash-free wipe, quick-release adapters, and durable rubber compounds for longevity in rain, snow, and sun.
If you’re unsure which option best fits your needs, a quick visit to a local auto parts store can help you compare blades side-by-side and confirm compatibility with your 2020 CR-V.
How to replace a rear wiper blade (quick guide)
Replacing the rear blade is typically a straightforward DIY task. Here’s a concise guide you can follow. Note that exact mechanisms can vary slightly by trim, but the general method is consistent across most 11-inch rear blades for the CR-V.
- Turn off the ignition and gently lift the rear wiper arm away from the glass until it stays in a raised position.
- Rotate or release the blade to detach it from the wiper arm’s connector, following the blade’s release mechanism.
- Remove the old blade and discard it properly.
- Align the new 11-inch blade with the arm’s connector and secure it until it clicks into place.
- Lower the wiper arm back onto the rear window and test to ensure a clean wipe across the glass.
After installation, wipe the rear window a few times to ensure full contact and clear visibility in adverse weather conditions.
Summary
The 2020 Honda CR-V requires an 11-inch rear wiper blade. Verify the length if you’ve replaced blades before or if you’re unsure about your specific build, then choose either OEM or a reputable aftermarket option. Replacement is a quick, tool-free job, and keeping a properly sized blade on the rear window helps maintain good visibility in rain and snow.