The rear wiper blade for the 2019 Audi Q7 is 11 inches long (approximately 280 millimeters).
In more detail, the 2019 Q7 (second generation, introduced mid‑2010s) uses a single rear wiper blade. For that model year and most common market configurations, the standard replacement size is 11 inches. While 11 inches is the typical length, you should verify with the exact part you purchase or by checking the vehicle’s documentation, as regional variations can occur.
Size confirmation and practical verification
To ensure you buy the correct blade and install it properly, follow these steps.
How to verify the blade size for your Q7
Before replacing, confirm the exact length and compatibility to avoid fit issues.
- Check the owner's manual or a vehicle-specific parts catalog for the rear wiper blade length.
- If you already have the old blade, measure its length from tip to tip of the blade (not the housing) to confirm 11 inches (approximately 280 mm).
- When shopping, look for a rear wiper blade labeled as 11 inches or 280 mm, and verify it’s listed as compatible with 2017–2019 Audi Q7 models; regional variants may exist.
- Ask a parts clerk or reference a reputable online parts guide to confirm compatibility for your exact market and trim level.
Concisely, 11 inches is the standard rear blade size for the 2019 Q7, but a quick verification helps ensure you’re ordering the correct item for your region.
- Replacement steps (general guidance): lift the wiper arm, remove the old blade by releasing the tab or clip, attach the new 11-inch blade to the arm’s hook or adapter, and resecure the arm against the windshield before testing the wipe cycle.
In summary, when shopping for a replacement, specify 11 inches (280 mm) for the 2019 Audi Q7 rear wiper blade, and always confirm the exact fit at purchase to account for any regional packaging differences.
Summary
The 2019 Audi Q7 uses an 11-inch rear wiper blade in most markets. To ensure accuracy, verify the blade length via the owner's manual, packaging, or a reputable parts guide, and follow standard replacement steps to install a new blade correctly. If in doubt, consult a dealer or a trusted automotive parts retailer with your vehicle identification to confirm compatibility.