The rear wiper blade for the 2018 Honda CR-V is 11 inches long (about 280 mm). This is the standard size used by Honda for that model year, and it’s the size you’ll typically find listed in OEM and aftermarket catalogs. If you’re unsure, you can confirm by checking the current blade or the owner's manual.
Size specification and how to verify
To ensure you buy the correct blade, it’s important to confirm the size through a quick check. The widely accepted OEM specification for the 2018 CR-V rear wiper is 11 inches. If you don’t have the manual handy, you can measure the blade or compare it against a known 11-inch blade from an online listing.
How to verify the size
Before purchasing, use these steps to confirm the blade length:
- Measure the current rear blade from tip to tip when it is removed from the arm.
- Look up the 2018 Honda CR-V rear wiper size in the official owner's manual or Honda’s parts catalog.
- When searching online, use keywords like “2018 Honda CR-V rear wiper blade 11 inch” to filter results.
In short, the reliable and common size to purchase for the 2018 CR-V is 11 inches (280 mm).
Replacing the rear wiper blade: quick guide
If you’re replacing the blade yourself, here’s a straightforward how-to to ensure a proper fit and operation.
- Lift the wiper arm away from the glass to access the blade assembly.
- Release the locking mechanism on the blade adapter (often a tab or clip) and slide the old blade out of the connector.
- Attach the new 11-inch blade to the connector, ensuring it clicks securely into place.
- Lower the wiper arm back onto the glass and test the wipe to confirm even contact and operation.
Following these steps will help you install a new blade correctly and avoid streaking or poor contact.
Where to buy and what to watch for
When shopping for a replacement, you’ll find both OEM and aftermarket options available in 11-inch sizes. Consider these tips to make a smooth purchase:
- Search by the exact year, make, and model (2018 Honda CR-V) to filter results to 11-inch rear blades.
- Decide between OEM (Honda) or aftermarket blades; aftermarket options often offer similar performance at a lower price.
- Check compatibility notes for your specific trim level, as some listings may include variations like sprayers or special coatings. If in doubt, consult the product page or contact the seller for confirmation.
In practice, 11 inches is the standard size you’ll want to look for in catalogs and retailers when replacing the rear wiper blade on a 2018 CR-V.
Summary
The 2018 Honda CR-V uses an 11-inch rear wiper blade (approximately 280 mm). Verify by checking the existing blade, the owner's manual, or official parts listings. Replacement is straightforward: remove the old blade, attach the new 11-inch blade, and test for proper operation. Whether you choose OEM or aftermarket, searching for “2018 Honda CR-V rear wiper blade 11 inch” will help you find the correct part quickly.