The rear wiper blade for the 2011 Honda CR-V is 12 inches in length. This size is the standard replacement option for the model year and helps ensure a clean sweep of the rear window. Below is how to verify the size and practical guidance on replacing it.
Verifying the correct size
To be certain you order the right blade, use one or more of these verification methods:
- Consult the 2011 CR-V owner’s manual or Honda’s official parts catalog for the rear wiper blade specification (12 inches).
- Check the blade itself or its packaging for size markings.
- Measure the blade length from tip to tip with a ruler or tape measure.
Confirming the length before purchase helps avoid fitting errors when shopping for a rear wiper blade.
Replacing a 12-inch rear wiper blade
Replacing a rear wiper blade on a 2011 CR-V is a straightforward maintenance task. The following steps assume a standard 12-inch blade with a common connector; check your exact connector type if your blade uses a different mount.
- Lift the wiper arm away from the glass until it holds steady in position.
- Locate the release mechanism on the blade’s mounting end and disengage the old blade from the arm.
- Attach the new blade by aligning it with the arm’s connector and securing it until it locks in place.
- Lower the wiper arm back to the glass and test the sweep to ensure full contact and no wobble.
When replacement is complete, run the wiper on low and high speeds to verify performance and coverage across the window.
Summary
For the 2011 Honda CR-V, the rear wiper blade size is 12 inches. Verify with your manual or by measuring, then replace with a 12-inch blade from OEM or reputable aftermarket brands. Regular checks help maintain rear visibility and safety.