The 2013 Honda Pilot uses six lug nuts per wheel on a bolt pattern of 6x139.7 mm. The lug nuts are M12 x 1.5 with a 60-degree conical (tapered) seat, and require a 19 mm wrench or socket to install or remove.
For owners replacing wheels or performing maintenance, understanding these specifications helps ensure proper fit and safe operation. The Pilot’s factory wheels use a six-lug setup, and aftermarket wheels must match the bolt pattern, seat type, and thread size to avoid issues.
Key lug nut specifications for the 2013 Pilot
Below are the core specifications you’ll need when buying lug nuts or checking wheel compatibility for a 2013 Honda Pilot. If you have aftermarket wheels, confirm the seat type and thread pitch with the wheel manufacturer.
- Wheel bolt pattern: 6 x 139.7 mm (5.5 inches between lug centers, 6 lugs)
- Number of lug nuts per wheel: 6
- Lug nut thread size: M12 x 1.5
- Lug nut seat type: 60-degree conical (conical seat)
- Lug nut hex size: 19 mm across flats
These specifications determine what lug nuts and wheel hardware you should use. Using the wrong seat type or thread size can cause improper seating or loosening under load.
Practical notes for owners
When replacing wheels, always verify the wheel manufacturer’s compatibility with your vehicle’s bolt pattern, seat type, and thread pitch. If in doubt, consult a professional or refer to the owner's manual.
Summary
For a 2013 Honda Pilot, expect six lug nuts per wheel on a 6x139.7 mm bolt pattern. The factory lug nuts are M12 x 1.5 with a 60-degree conical seat and require a 19 mm wrench/socket. Always verify compatibility with any aftermarket wheels and follow torque specifications from Honda when tightening.