The lug nuts are M12 x 1.5 with a 19 mm hex head, designed for a 4x100 bolt pattern on most 2007 Fits, and they use a conical (tapered) seat. The typical torque specification is about 80 ft-lbs (108 Nm).
For 2007 Honda Fits, the wheel hub and wheel mounting layout follow the common Honda configuration of a 4x100 bolt pattern with standard lug nuts sized to fit the factory wheels. When replacing wheels or nuts, it’s important to confirm exact specifications for your particular vehicle, especially if aftermarket wheels have been installed.
Key lug nut specifications
Below is a concise compilation of the core specifications you’ll typically encounter on a 2007 Honda Fit. This helps when shopping for replacements or doing maintenance on the wheels.
- Thread size: M12 x 1.5
- Hex size (nut wrench): 19 mm
- Seat type: Conical (tapered)
- Bolt pattern: 4 x 100 mm
- Torque specification: 80 ft-lb (108 Nm)
These specifications are the standard for OEM-style lug nuts on the 2007 Fit. If your vehicle has aftermarket wheels or lug nuts, verify compatibility with the wheel seat type and thread engagement.
Additional considerations
When servicing wheels on a 2007 Honda Fit, keep these tips in mind to ensure safety and proper seating:
- Always use a properly calibrated torque wrench and tighten in a star pattern to seat the wheel evenly.
- Inspect lug nuts for wear, corrosion, or damaged threads; replace any that show signs of damage.
- If you’re unsure about the wheel compatibility, consult the owner’s manual or a Honda dealer, especially after changing wheels or using aftermarket rims.
Summary
The 2007 Honda Fit commonly uses M12 x 1.5 lug nuts with a 19 mm hex head, on a 4x100 bolt pattern with a conical seat, tightened to about 80 ft-lbs (108 Nm). Always verify exact specifications for your vehicle, particularly when using aftermarket components, and torque to the recommended specification.