The 2010 Chevrolet Malibu uses 14mm lug nuts on its 5x115 mm wheels, with a 60-degree conical seat and a typical torque specification of about 100 ft-lbs (135 Nm).
For the Malibu, the wheel studs are 12 mm in diameter with a thread pitch of 1.5 mm, and the bolt pattern is 5 on 115 mm. Use factory-equivalent lug nuts that match the stud size, seat type, and hex size. If you’re replacing or upgrading wheels, verify compatibility with the vehicle’s original hardware and consult the owner's manual or a dealer if you have aftermarket components installed.
Key lug nut specifications
Before listing, note the essential specs you’ll want to match when replacing lug nuts on this model.
- Lug nut hex size: 14 mm
- Seat type: 60-degree conical (acorn) seat
- Bolt pattern: 5 x 115 mm (5 on 4.53 inches)
- Stud/thread size: M12 x 1.5
- Recommended torque: ~100 ft-lbs (135 Nm)
Concluding: These specifications reflect the OEM configuration for the 2010 Malibu. If you have aftermarket wheels or different hardware, verify compatibility to ensure safe installation and proper seating.
Notes on maintenance and replacements
When replacing lug nuts, use ones that match the seat, thread, and hex size of the original hardware. Over-tightening can damage studs; under-tightening can cause wheel detachment. If your vehicle has aftermarket wheels, confirm that the lug nuts are specifically designed for those wheels and the Malibu’s studs.
Summary
For a 2010 Chevy Malibu, expect 14 mm lug nuts with a 60-degree conical seat on 5x115 mm wheels, using M12 x 1.5 threads and about 100 ft-lbs of torque. This combination ensures a secure fit and safe operation when installing or replacing wheels. Always consult the owner’s manual or a dealership if you’re unsure about aftermarket parts.
What size socket fits a Chevy lug nut?
In addition, BONOSS dual hex wheel sockets are designed for your Chevy lug nuts and locks. This double-hex socket has dual 19mm (3/4 in.) and 21mm (13/16 in.) hex socket sizes.
What size are the lug nuts on a 2010 Chevy Malibu?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each) (Part No. 611-182)
What size are the lug nuts on a Chevy Malibu?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Open End, 0.831" Length, Chrome, 1 Pack (Part No. 611-183.1)
Are all lug nuts 21mm?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.