The wheel studs on a 2015 Honda Accord Sport are 12 mm in diameter with a 1.5 mm thread pitch (M12x1.5).
The 2015 Accord Sport (9th generation) uses a 5-lug, 114.3 mm bolt circle. When replacing studs, verify the exact size against your vehicle’s VIN and wheel/hub configuration, since production variations can occur by trim or region.
Wheel stud specifications
Overview of the core measurements
These core measurements are what you’ll need when verifying or ordering replacement studs.
- Stud diameter: 12 mm (M12)
- Thread pitch: 1.5 mm (M12x1.5)
- Bolt pattern: 5 x 114.3 mm (5 lugs)
These specs cover most 2015 Accord Sport wheels. Always confirm with the exact parts diagram for your vehicle if you are replacing hardware.
Verifying on your vehicle
If you’re unsure or ordering replacements, use these steps to verify the exact fit for your car.
- Check the VIN-specific Honda parts catalog or the owner’s manual for your trim.
- Remove a wheel and measure the stud diameter and thread pitch with calipers or a thread gauge.
- Consult a dealer or qualified shop with your vehicle details to confirm part numbers before purchase.
Proper verification reduces the risk of ordering incorrect studs that could compromise wheel mounting and safety.
Practical implications for maintenance
Knowing the correct stud size helps when swapping wheels, installing winter tires, or replacing the hub assembly. Using the proper M12x1.5 studs ensures correct engagement with lug nuts and a secure fit.
Summary
For a 2015 Honda Accord Sport, the wheel studs are typically 12 mm in diameter with a 1.5 mm thread pitch (M12x1.5), aligned with a 5x114.3 bolt pattern. Always verify against your VIN and the specific wheel/hub assembly to ensure exact compatibility before replacement.