The driver’s-side front blade is typically 26 inches, the passenger-side front blade 17 inches, and the rear blade about 11 inches on most modern CR-Vs. However, exact sizes vary by model year and trim, so verify for your specific vehicle.
Typical sizes for recent Honda CR-V models
The following sizes cover most CR-Vs manufactured from around 2017 onward. Use this as a general guide, but always confirm against your vehicle’s specifics.
- Front driver-side blade: 26 inches
- Front passenger-side blade: 17 inches
- Rear blade: 11 inches
Sizes can vary by year and regional specifications, especially for older CR-V generations. Always check the owner's manual or a reputable parts finder for your exact VIN.
Knowing when sizes differ by year
Older iterations of the CR-V may use different blade lengths. If you own a generation outside the 2017–present window, verify the blade sizes with your manual or a dealer, as replacements can require different measurements.
How to determine the correct size for your CR-V
To confirm the right sizes for your specific CR-V, you can follow these steps:
- Check the owner's manual for the recommended blade lengths.
- Use Honda's official parts finder or a trusted retailer by entering your year/model to see compatible blades.
- Physically measure your current blades if you’re replacing them yourself (measure along the blade edge from end to end).
- Ask a dealer or professional installer if you’re unsure, providing your VIN for precise fitment.
Following these steps will ensure you purchase the correct blades for your vehicle and avoid fit issues.
Summary
In summary, plan for 26" driver, 17" passenger, and 11" rear blades for most newer Honda CR-Vs, but always verify the exact sizes for your model year and trim using official sources or a trusted parts retailer.