The Ram 1500 uses a 2-inch hitch receiver as the standard size on modern models with the factory towing package. This is the universal receiver size you’ll encounter on current Ram pickups, though towing capacity depends on the engine, drivetrain, and configuration.
Understanding Ram 1500 hitch sizes
Knowing the receiver size helps you choose the right hitch, ball mount, and accessories. The 2-inch square receiver is the norm for Ram 1500s built for towing and is compatible with most Class III and Class IV hitch accessories. Note that for heavy-duty payloads or specialized towing, the Ram setup may differ in terms of mounting or additional components.
Key points about the Ram 1500 hitch size:
- 2-inch (2.0 in) square hitch opening is standard on Ram 1500 with factory towing equipment.
- 1-1/4-inch receivers are not standard for Ram 1500 towing; adapters exist but are not typical for towing heavy loads.
- Fifth-wheel and gooseneck towing in Ram trucks use a different bed-mounted or rail/puck system rather than a standard 2-inch receiver.
Having the correct receiver size ensures compatibility with trailers, bike racks, and other hitch-mounted gear. Always verify the exact size for your vehicle’s year and trim on the build sheet or owner’s manual.
How to verify your specific Ram 1500’s hitch size
To confirm the exact hitch size on your Ram 1500, check these sources and steps:
- Consult the owner’s manual or the factory-trim label for towing specifications and hitch class.
- Inspect the receiver opening physically: measure the inside width of the square opening with a tape measure; a 2-inch opening is typical on Ram 1500 hitches.
- Look for stamped markings on the hitch itself near the receiver (e.g., “2" x 2"” or “2" Class III”).
- Reference your build sheet or window sticker, which lists the towing package and hitch configuration.
If you’re unsure after these checks, contact a Ram dealer or service center with your VIN to confirm the exact hitch configuration for your vehicle.
Summary
For most Ram 1500 trucks, the standard hitch receiver size is 2 inches. This size supports common towing packages and accessory gear. Always verify your year and trim's specifics via the owner's manual, build sheet, or dealer if you’re planning a trailer setup or purchasing a hitch.