Low-beam bulbs: 9006; high-beam bulbs: 9005. If your Odyssey uses HID or LED headlights, the bulb type differs (e.g., D2S/D3S for HID). Always verify with the owner’s manual or by inspecting the current bulb.
Understanding the bulb sizes for the 2010 Odyssey
The 2010 Honda Odyssey, part of the third generation, typically used halogen headlights with standard sizes across most trims. The sizes below reflect common configurations for most 2010 models with halogen headlights. Always confirm for your specific trim or any aftermarket conversions.
- Low beam: 9006 (HB4)
- High beam: 9005 (HB3)
These sizes cover the most common setups for the 2010 Odyssey. If your vehicle has different equipment or factory HID/LED headlights, sizes will differ and you should consult the manual or dealer for the exact specification.
Special cases: HID and LED headlights
Some higher trims or aftermarket conversions may use HID bulbs, typically D2S/D2R. LED headlights use integrated modules rather than replaceable bulbs. If you see a HID/LED system, refer to the owner's manual or the headlight assembly labeling to identify the correct bulb type and replacement procedure.
How to verify the exact bulb size on your vehicle
To ensure you purchase the right bulb the first time, verify the exact size for your vehicle. The following steps help confirm the correct specification for your exact Odyssey model and trim.
- Open the hood and access the headlight assembly behind the wheel well. Remove the dust cap if present.
- Carefully disconnect the wiring connector and remove the bulb from the socket. Check the base for size stamping (e.g., 9006, 9005, etc.) or note the label on the packaging you previously purchased.
- Consult the owner's manual or Honda's official parts database with your vehicle's VIN to confirm the correct bulb size for your trim and region.
- Purchase the specified bulb, and consider keeping an exact spare on hand for future replacements.
Note: If you have HID or LED headlights, the replacement process may differ (no standard replaceable bulbs in some designs) and might involve replacing the entire headlight module or ballast. Always follow manufacturer guidance.
Summary
For most 2010 Honda Odysseys with halogen headlights, use 9006 for low beams and 9005 for high beams. Always verify your exact configuration by checking the bulb itself, the owner's manual, or Honda's official resources, especially if your vehicle has HID or LED headlights or aftermarket upgrades. A quick confirmation now can prevent ordering the wrong parts.