The high-beam bulb in most Camry models with traditional halogen headlights is typically a 9005 (HB3). If your Camry uses HID or LED headlights, there is no replaceable high-beam bulb—the high beams are built into the headlight unit. Always check your owner's manual or the vehicle’s bulb diagram to confirm the exact size for your year and trim.
Understanding Camry headlight configurations
Headlight setups in the Camry vary by year and trim. Some older Camrys use a separate, replaceable high-beam bulb, while newer models may rely on HID or LED headlamps where the high-beam function is integrated into the headlight assembly.
What to look for in your model
Identify whether your Camry uses a halogen bulb that can be swapped, or if it has HID/LED headlights with no dedicated high-beam bulb. Inspect the headlight housing or consult the owner’s manual to determine the correct approach.
Typical bulb sizes and configurations
Before listing common options, note that the exact size can vary by year and trim. The following covers the most typical setups you might encounter on Camry models:
- Halogen headlights with a separate high-beam bulb: 9005 (HB3) is commonly used.
- LED or HID headlights: no separate high-beam bulb. The high beams are part of the LED module or HID assembly, and replacement generally involves the module or ballast rather than a simple bulb swap.
Always confirm the exact bulb type for your vehicle through the owner's manual or a Toyota parts diagram for your VIN and model year.
Replacing the high-beam bulb: a quick guide
If your Camry uses a replaceable halogen high beam, follow these general steps. For LED or HID systems, professional service is typically required.
- Ensure the vehicle is off and the headlights have cooled.
- Access the headlight bulb assembly (through the engine bay or under the front bumper/cover as your model dictates).
- Disconnect the electrical connector from the high-beam bulb.
- Remove the old bulb and install a new 9005 HB3 bulb, avoiding contact with the glass with bare fingers.
- Reconnect the connector, reassemble the headlight cover, and test the high beam function.
Note: If your Camry has LED or HID headlights, replacing high beams typically requires a service appointment or component replacement rather than a simple bulb swap.
Summary
For Camrys with traditional halogen headlights, the high-beam bulb is usually 9005 (HB3). If your car is equipped with HID or LED headlights, there is no separate high-beam bulb to replace—the high beams are built into the headlight system. Always verify with the owner's manual or a reliable parts diagram for your exact year and trim.