Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size battery for 2017 Honda Fit key fob?

The 2017 Honda Fit key fob uses a CR2032 3-volt coin cell battery.


This article confirms the exact battery type for the 2017 Fit’s remote and provides practical replacement steps, compatibility notes, and tips for testing the fob after installation.


Battery type and compatibility


For the 2017 Honda Fit, the standard remote keyless entry fob typically requires a CR2032 battery. This is a common 3-volt lithium coin cell that fits most Honda fobs of that era. If you recently replaced the battery and the fob still isn’t working, double-check the orientation and ensure the fob casing is fully closed.


To replace the battery, follow these steps:



  • Remove the mechanical key blade by sliding the release and pulling it out.

  • Gently pry apart the fob case to expose the internal battery.

  • Take out the old battery and insert a new CR2032 with the positive (+) side facing up.

  • Reassemble the fob and press the buttons to confirm proper operation.


After the replacement, your key fob should respond normally if the battery orientation is correct and the case is securely closed. CR2032 batteries are widely available and typically offer 2–5 years of life depending on usage.


What to do if the fob still doesn’t work


If the fob remains unresponsive after replacing the battery, consider reprogramming or re-synchronizing the fob with your vehicle, or having a dealership or automotive locksmith diagnose potential issues such as worn contacts, wear on the button pads, or electronic faults.


Summary


The 2017 Honda Fit key fob uses a CR2032 3-volt coin cell battery. Replacing it involves safely opening the fob, inserting a new CR2032 with the correct orientation, and reassembling. If problems persist after replacement, check orientation, contacts, and consider reprogramming with professional help.

What size of battery fits a 2017 Honda Fit?


151R
DieHard Gold – Battery: 151R Group Size, 410 CCA, 510 CA, 57 Minute Reserve Capacity (Part No. 151R)



Can I use a CR2032 instead of a CR2025 in a key fob?


Fit and Functionality:
However, if it's too tight or prevents the case from closing properly, it might be better to stick with the CR2025 to avoid damaging the key fob. In summary, you can use a CR2032 instead of a CR2025 as long as it fits properly in the battery compartment of your car key.



What size battery fits in a Honda key fob?


And then twist. Your key fob isn't open all the way yet so now you'll need to use the key end and wedge it between the gap. And pop it. Open.



What kind of battery does a 2017 Honda Fit key fob take?


Over hold down on the slider pull out the key. And you see the case has a split in it and you could use the valet. Key by prying it open just insert it between those two tabs here. And twist that


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.