The typical 2013 Ford Fusion uses a standard 12-volt lead-acid battery. Replacement batteries for most non-hybrid versions commonly come in group sizes around 94R or 96R with roughly 750–800 cold-cranking amps (CCA). Always verify the exact fit by checking your owner's manual, the current battery label, or a parts lookup using your VIN.
This article explains how to identify the correct battery size for your specific Fusion, including differences between non-hybrid and hybrid variants, how to read the battery label, and practical tips for buying, installing, and maintaining the battery.
How to determine the correct battery size
Use the steps below to identify the exact group size and CCA rating that fits your car.
- Check the owner's manual for the recommended battery group size and CCA rating.
- Look at the labeling on your current battery—the group size (for example, 94R or 96R) and the CCA rating are usually stamped on the label.
- Use your vehicle identification number (VIN) on a parts retailer or Ford dealer site to pull the exact spec for your engine and trim.
- Measure the battery tray space and note terminal layout to ensure a close fit if you’re choosing a substitute group size.
By following these steps, you can buy a battery that fits correctly and delivers reliable starting power.
Typical sizes by model variant
Below are common configurations found in 2013 Fusion models. Always verify for your exact vehicle, since engine, trim, and options can influence the replacement size.
- Non-hybrid 2013 Ford Fusion (most trims with 2.5L I4 or EcoBoost engines): typically a 12-volt lead-acid battery in group sizes around 94R or 96R with approximately 750–800 CCA. Some versions may use other group sizes; verify with the battery label or a parts catalog.
- 2013 Ford Fusion Hybrid: uses a standard 12-volt auxiliary battery in addition to the high-voltage traction battery. The 12V battery is usually an AGM type sized to fit the under-hood bay; exact group size varies by production.
- Other notes: If your car has a special equipment package or regional variations, confirm the exact spec with a parts professional or Ford dealer.
In sum, most non-hybrid 2013 Fusions take a 12V battery around Group 94R/96R with roughly 800 CCA; the hybrid uses a 12V AGM battery sized to fit the vehicle’s bay. Always confirm the exact size using your VIN or the battery label.
Where to buy and how to verify
Choose reputable retailers and double-check compatibility before purchasing to avoid getting the wrong fitment.
- Check the battery group size and CCA on the battery label or in the owner’s manual.
- Enter your VIN on retailer sites (AutoZone, Advance Auto Parts, O'Reilly, etc.) to pull the exact match for your engine and trim.
- If uncertain, consult a parts professional or Ford dealer to confirm the correct size before buying.
Verification helps ensure reliable starting power and compatibility with your car’s electrical system.
Maintenance and replacement tips
Keep these guidelines in mind when replacing or maintaining your Fusion battery.
- When replacing, disconnect the negative terminal first and reconnect it last to prevent sparks.
- Clean corrosion from terminals and ensure clamps are tightened to the specified torque.
- Check the alternator and charging system if a new battery discharges prematurely or seems weak.
- Recycle old batteries at a compliant recycling facility or retailer that accepts used batteries.
A well-maintained battery supports reliable starts and steady electrical performance for your Fusion.
Hybrid variant notes
12V battery in Fusion Hybrid
The 12-volt battery in a Fusion Hybrid powers accessories and controls when the high-voltage system is offline. It is typically an AGM battery sized to fit the under-hood space. Confirm the exact group size and CCA with Ford parts or your dealer, especially if modifications or unique equipment affect bay layout.
In all cases, cross-check with the latest manufacturer information. This article provides general guidance based on typical 2013 Fusion configurations and should be verified against your specific vehicle’s VIN.
Summary
For the 2013 Ford Fusion, most non-hybrid models use a 12V lead-acid battery, commonly in group sizes 94R or 96R with about 750–800 CCA. The Fusion Hybrid uses a 12V AGM battery with a fit-for-space size that varies by production. Always confirm the exact group size and CCA for your vehicle using the owner’s manual, existing battery label, or a VIN-based parts lookup before purchasing.
How many CCA does a 2013 Ford Fusion need?
650
The Right Battery Size for a 2013 Ford Fusion
| Battery | Engine | Cold Cranking Amps |
|---|---|---|
| 90/T5 | L4/1.6L | 650 |
| H6-AGM | L4/1.6L | 760 |
| 90/T5 | L4/2.5L | 650 |
| 90/T5 | L4/2.0L | 650 |
What car battery does a Ford Fusion take?
Ford Fusion cars run on either traditional flooded batteries or AGM batteries.
What is the difference between a 24F and a 35 battery?
The 24F battery is larger, heavier, and offers higher Cold Cranking Amps (CCA) and reserve capacity, ideal for bigger vehicles with higher power demands. The 35 battery is smaller and lighter, suitable for compact cars with moderate starting needs.
What kind of battery does a 2013 Ford Fusion use?
DieHard Gold – Battery : T5 Group Size, 650 CCA, 810 CA, 90 Minute Reserve Capacity (Part No. 90/T5)