Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size battery does a 2015 Honda CRV key fob take?

The key fob for a 2015 Honda CR-V uses a CR2032 3-volt lithium coin battery.


For context, Honda's CR-V remotes from that era commonly use a CR2032 coin cell. The battery is small but standard across many vehicles, and a fresh CR2032 can restore range and reliability quickly without professional service.


Battery size and compatibility


Understanding the exact battery size helps you buy the right part and avoid mismatched replacements.


Commonly used with the 2015 CR-V fob, the CR2032 is a 3-volt coin cell. The standard size for many Honda remotes of this generation is 20 mm in diameter and 3.2 mm thick.



  • Reduced range: the fob needs to be closer to the car to unlock or start it.

  • Unreliable response: the car responds inconsistently or only after multiple presses.

  • Dim indicator light: the fob's LED (if equipped) is faint or does not light up as expected.

  • Frequent battery drains quickly: the fob seems to run out of power sooner than expected.


When you notice these signs, replacing the battery is a common, quick fix and is often all that's needed to restore full functionality.


How to replace the battery


Follow these steps to replace the CR2032 battery in a typical 2015 CR-V key fob. You may need a small flat tool or a coin to help pry the case apart.



  1. Remove the mechanical key blade: slide the release and pull out the metal key that hides in the fob.

  2. Open the fob: use a small flathead screwdriver or a coin to gently pry off the back cover, starting at the seam.

  3. Remove the old battery: take note of the orientation (the plus side is usually facing up).

  4. Insert the new battery: place a CR2032 with the plus side facing up, ensuring it sits flat in the compartment.

  5. Reassemble the fob: snap the back cover back on and reinsert the mechanical key.

  6. Test the fob: press lock/unlock/start from a short distance to verify operation.


With a fresh battery, you should see improved response and range. If the fob still misbehaves, the issue may lie with the fob's electronics or the vehicle's receiver, and a dealership or locksmith can help.


Summary


In brief: the 2015 Honda CR-V key fob takes a CR2032 3V lithium coin battery (20 mm diameter, 3.2 mm thick). Replacing it is a simple DIY task. If problems persist after replacement, seek professional service to check programming or compatibility.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.