Front wiper blades on most current Toyota Tundra models measure 20 inches on the driver’s side and 18 inches on the passenger’s side, with a typical 12-inch rear blade where the vehicle is equipped with a rear wiper.
Wiper blade sizing for the Toyota Tundra can vary by model year and trim level. Below is a practical guide to the most common configurations and how to confirm the exact size for your truck.
Front wiper blade sizes by generation
The following overview notes common front-blade sizes used on Tundra models. Always verify against your specific year and trim, since production changes can alter the recommended lengths.
- 2022–present Toyota Tundra (second generation): Driver 20", Passenger 18"
In summary, current-generation front blades are typically 20 inches for the driver’s side and 18 inches for the passenger side. If you own an older or differently equipped Tundra, sizes may differ and should be checked individually.
Choosing the right blade type and installation tips
Beyond length, blade style (all-season vs. winter-specific), attachment type, and curvature matter for proper fit and performance. When replacing, consider pairing with high-quality aftermarket blades designed for 20" and 18" lengths, and follow the installation instructions to ensure full contact with the windshield edge.
If you prefer guidance tailored to your exact build, consult the owner’s manual or use a parts retailer’s vehicle-fit tool by entering year, make, model, and trim.
How to verify the correct size for your Tundra
To ensure you order the correct blades, use these checks before buying:
- Check the owner’s manual or the specification sticker near the wiper area for blade lengths.
- Inspect the current blades for size markings (e.g., 20" / 18") or a model number that can be matched to a replacement pair.
- Use an online “fit my vehicle” tool from a reputable auto parts retailer by entering year, make, model, and trim.
- If in doubt, measure the current blades with a ruler or tape measure to confirm their lengths.
Following these steps helps ensure you select the exact blades for your vehicle, avoiding fit issues or gaps in coverage.
Rear wiper blade considerations
Not every Tundra configuration includes a rear wiper, but for those that do, the rear blade is typically smaller than the fronts. The common rear blade size for a Tundra with a rear wiper is about 12 inches, though exact length can vary by year and trim.
- Rear wiper (if equipped): typically 12 inches
Always verify the rear blade size when replacing, as some models or regional specs may differ slightly from the standard 12-inch length.
Summary
For most current Toyota Tundra models, plan to replace front wipers with 20-inch driver-side blades and 18-inch passenger-side blades, plus a 12-inch rear blade if your truck has a rear wiper. Because sizes can vary by year and trim, always confirm via the owner’s manual, blade packaging, or an online fit tool before purchasing.