The wheel nuts on most Honda HR-V models are M12 x 1.5 with a 60-degree conical seat. A 19 mm lug wrench or socket fits those nuts.
However, there can be variations by generation and market, so you should confirm with your owner's manual or a dealership if you’re unsure.
At a glance: key lug-nut facts for the HR-V
Before you work on the HR-V’s wheels, here are the essential details you should know about lug nuts. The following list covers thread size, seat type, and tool size.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (tapered) seat
- Socket size for removal: 19 mm
In most markets and across recent HR-V generations, these specifications are standard, but always verify for your exact model year and trim.
Conclusion from the key details: the Honda HR-V generally uses M12 x 1.5 lug nuts with a 60-degree conical seat, and a 19 mm socket is typically required to remove them.
Details by generation
First generation HR-V (2016–2022)
For the original HR-V, most versions use the standard M12 x 1.5 lug nuts with a 60-degree conical seat. The usual tool to remove them is a 19 mm socket. Always consult the service manual or dealer for the exact torque specification and any trim-specific variations.
Second generation HR-V (2023–present)
The newer generation largely maintains the same lug-nut geometry: M12 x 1.5 thread with a 60-degree conical seat, and a 19 mm removal socket. Market differences can exist, so verify against the owner’s manual or any labels on the vehicle if you’re preparing for maintenance or tire service.
Summary
For most Honda HR-V models, the wheel nuts are M12 x 1.5 with a 60-degree conical seat, and a 19 mm socket is used to remove them. While these specifications cover current and recent generations, always double-check your exact year, trim, and regional variant in the owner’s manual or with a Honda dealer to account for any differences.