Most Honda Pilot models use M12 x 1.5 lug studs with a 60-degree conical (acorn) seating, and the lug nuts typically require a 19 mm wrench or socket. Exact sizes can vary by year and trim, so it’s best to confirm for your specific vehicle.
Common specifications across generations
Below is a concise overview of the core sizing you’re likely to encounter on most Honda Pilot models. Since wheel assemblies can vary by year and package, use these as a baseline and verify against your vehicle’s documentation.
Key specs at a glance
- Thread size and pitch: M12 x 1.5
- Seat type: 60-degree conical (acorn) seating
- Lug nut hex size: typically 19 mm
- Bolt pattern (for reference): 5-lug, 120 mm bolt circle
- Recommended torque: around 80 ft-lbs (108 N·m), but check the owner's manual for your exact year
These specifications cover the majority of Honda Pilot models across several generations. Always confirm for your specific vehicle before purchasing replacements or performing maintenance.
Year-by-year variations and how to confirm
While the baseline specs above apply to most Pilots, there are occasional year-to-year differences. Here’s how to narrow it down for your exact model.
What changes by generation
- 2003–2008 (first generation): Generally M12 x 1.5 studs with 60-degree conical lug nuts and a 5x120 bolt pattern.
- 2009–2015 (second generation): Similar sizing to the first generation; verify with this specific year if you’re replacing wheels or lug nuts.
- 2016–2021 (third generation): Continues with M12 x 1.5, 60-degree conical lug nuts, and 5x120 bolt pattern; confirm torque spec from the manual.
- 2022–present (fourth generation): Specs remain consistent in most configurations, but trim or wheel upgrades can affect seating and bore details; verify for VIN-specific parts
Because wheel configurations and aftermarket options can vary, always check the official documentation or consult a dealer to confirm the exact lug nut size for your exact model year and trim.
How to verify your exact lug nut size on your Pilot
To ensure you have the correct size for replacements or maintenance, use these verification steps.
- Refer to the owner’s manual or service manual for lug nut dimensions and torque specifications
- Check the sticker on the driver’s door jamb or inside the fuel cap area for wheel lug information
- If you’ve changed wheels or upgraded tires, verify that the lug nut seat type and thread size match the new parts
- When in doubt, contact a Honda dealer or a reputable tire shop with your VIN to confirm the exact lug nut size for your vehicle
Verifying the correct lug nut size and torque helps prevent damage to wheels, studs, or the wheel hub, and ensures safe driving conditions.
Summary
For most Honda Pilot models, expect M12 x 1.5 lug studs with 60-degree conical seating and a 19 mm lug nut socket. The common bolt pattern is 5x120, with a typical torque target around 80 ft-lbs (108 N·m). Always confirm the exact specification for your specific year and trim by consulting the owner’s manual, the door jamb placard, or your local Honda dealer, especially if you’ve modified wheels or are using aftermarket parts.