The lug nuts on a 2022 Honda Accord are M12 x 1.5 with a 60-degree conical (acorn) seat, typically used with a 19 mm socket, set on a 5x114.3 mm bolt pattern, and tightened to about 80 ft-lbs (108 Nm).
These specs cover the standard factory wheels for the 2022 Accord. Trims with different wheel options or aftermarket wheels may vary in socket size, thread pitch, or torque requirements. Always verify by checking the owner’s manual, the lug nuts’ stamping, or the service manual for your specific wheel setup.
Key lug nut specifications
Here are the key facts you should know before servicing the wheels:
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (acorn) seat
- Bolt pattern: 5 x 114.3 mm (5x114.3)
- Number of lug nuts per wheel: 5
- Socket size (hex): 19 mm
- Torque specification: approximately 80 ft-lbs (108 Nm)
These specifications help ensure proper fit and safe installation when rotating tires or replacing wheels. If you’re using aftermarket wheels, verify the lug nut size, seat type, and torque with the wheel manufacturer.
Variations with trims or aftermarket wheels
Some sport-oriented trims or aftermarket wheels may use a different seat angle, thread pitch, or hex size. Always confirm the exact lug nut requirements for your specific wheel package to avoid damage or improper installation.
Summary
In brief, the 2022 Honda Accord uses M12 x 1.5 lug nuts with a 60-degree conical seat on a 5x114.3 mm bolt pattern, typically tightened to about 80 ft-lbs with a 19 mm socket. When in doubt, consult the owner’s manual or the wheel manufacturer for your particular configuration.