What size are the lug nuts on a 2018 Honda Pilot?

The 2018 Honda Pilot typically uses M12 x 1.5 lug nuts with a 60-degree conical (acorn) seating. The standard socket size to install or remove them is 19 mm, and the usual torque specification is about 80–100 ft-lbs (108–135 Nm). Always verify these details against your vehicle’s manual or door placard, as wheel/package variations can occur.

Key lug nut measurements

The following details describe the core measurements and tools commonly used for the 2018 Pilot. This helps ensure proper fitment and safe reinstallation after maintenance or tire changes.

• Thread size: M12 x 1.5


• Seat type: 60-degree conical (acorn) seating


• Socket size: 19 mm (3/4 inch)


• Recommended torque: approximately 80–100 ft-lbs (108–135 Nm)

Note that exact specifications can vary with aftermarket wheels or different trim packages. Always confirm with official documentation for your specific vehicle configuration.

Notes and verification

For the most precise information, consult the owner's manual, the tire and loading information placard on the driver’s door jamb, or the wheel manufacturer’s documentation. If you’re unsure, have a professional technician verify torque and fitment when installing wheels or changing lug nuts.

Summary

In short, the 2018 Honda Pilot generally uses M12 x 1.5 lug nuts with a 60-degree conical seat, requiring a 19 mm wrench/socket and a tightening torque around 80–100 ft-lbs. Always check your specific vehicle’s documentation to account for trim or wheel differences.

Are all lug nuts 21mm?

The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.

Is 7/8 socket the same as 22mm?

A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.

What size are the lug nuts on a Honda Pilot?

Dorman – Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome (sold by each) (Part No. 611-327)

What size of socket for to remove lug nuts Honda?

What Size Honda Lug Nuts Do I Need?