The lug nuts for a 2016 Honda Accord are M12 x 1.5 with a 60-degree conical seat, and they typically require a 19 mm socket. This configuration applies to most stock wheels across trims, though aftermarket wheels can differ.
The 2016 Accord uses a five-lug wheel setup with a bolt pattern of 5 x 114.3 mm. The lug nuts are sized to fit the wheel studs and seat type and should be torqued to the manufacturer’s specification when installing wheels or performing maintenance.
Key specifications for the 2016 Honda Accord
The following specs reflect the factory hardware used on most 2016 Accord models with stock wheels. Note that aftermarket wheels may require different parts.
Understanding the specs
- Thread size: M12 x 1.5
- Seat type: 60-degree conical seat
- Socket size: 19 mm (nut wrench)
- Bolt pattern: 5 x 114.3 mm
These values describe the hardware you’ll find on factory wheels and are a good baseline when purchasing replacements or performing maintenance. Always verify compatibility with your specific vehicle and wheel package.
Torque and installation notes
The lug nuts should be torqued to the Honda specification, typically around 80 ft-lb (108 Nm), to ensure proper clamping without risking thread damage or rotor warping. Use a calibrated torque wrench and follow the sequence recommended in the owner's manual or service guide.
If you are unsure about your wheels or have aftermarket rims, consult the dealer or a service manual to confirm the exact lug-nut size, seat type, and torque values for your VIN and wheel package.
Additional considerations
Always use proper hardware and torque. Using incorrect lug nuts or over-tightening can lead to wheel failure or damage to the brake rotor and hub assembly. Check lug nuts after driving a short distance to ensure they remain tight.
Summary
For a 2016 Honda Accord, the standard lug nuts are M12 x 1.5 with a 60-degree conical seat, and typically require a 19 mm socket. The bolt pattern is 5 x 114.3 mm, and the torque specification is about 80 ft-lb (108 Nm). Always verify with the owner's manual or dealer for your exact configuration.