Five lug nuts per wheel are used on the 2014 Honda CR-V. The wheel studs are M12 with a 1.5 mm thread pitch, the lug nuts have a 60-degree conical (acorn) seat, and the wheel uses a 5x114.3 mm bolt pattern. The typical hex size for the lug nuts is 21 mm.
Technical specifications
The following details cover the essential measurements you’ll need when sourcing replacement lug nuts or wheels for a 2014 CR-V. These specs focus on fitment and fastener geometry rather than maintenance steps.
- Number of lug nuts per wheel: 5
- Wheel bolt pattern: 5x114.3 mm (5 on 4.5 inches)
- Lug nut thread size: M12 x 1.5
- Lug nut seat type: 60-degree conical (acorn) seat
- Lug nut hex size: 21 mm
With these specifications, you can verify compatibility when sourcing replacement wheels or lug nuts and choose OEM or equivalent hardware that matches the 2014 CR-V’s fitment. Always check exact torque and seat requirements in the owner's manual or a Honda service sheet for your specific trim and year.
Practical considerations for maintenance
When servicing tires or wheels, ensure the lug nuts match the wheel’s seat and pattern, use OEM or equivalent hardware, and follow Honda’s recommended torque. If you replace wheels, confirm the new setup preserves the 5x114.3 mm bolt pattern and M12x1.5 conical seats to maintain proper wheel retention.
Summary
In short, the 2014 Honda CR-V uses five lug nuts per wheel with a 5x114.3 mm bolt pattern, M12 x 1.5 thread size, a 60-degree conical seat, and a 21 mm hex for the lug nuts. This information helps you source the correct hardware and ensure safe, proper wheel installation. For exact torque values and any trim-specific notes, consult the owner's manual or Honda service documentation.