The lug nuts for a 2013 Honda CR-V are M12 x 1.5 with a 19 mm hex across flats, used on a five-lug setup with a 114.3 mm bolt circle. The standard seat is a 60-degree conical style, and typical torque is around 80 ft-lbs (108 Nm).
Technical details at a glance
Keep these core specifications in mind when ordering replacements or inspecting wheels for the 2013 CR-V.
- Thread size: M12 x 1.5
- Nut seat: 60-degree conical (short seat)
- Hex size (across flats): 19 mm
- Number of lug nuts per wheel: 5
- Wheel bolt pattern (PCD): 5 x 114.3 mm
These details reflect the factory setup; aftermarket wheels can alter some specs, so verify fitment with your exact wheel model and vehicle trim.
Torque and maintenance guidelines
Proper torque ensures safe wheel retention and avoids damage or uneven seating.
- Recommended torque: 80 ft-lbs (108 Nm)
- Tightening pattern: follow a star/criss-cross sequence to seat the wheel evenly
- Re-torque after wheel installation and bedding-in period (typically 50–100 miles)
Always verify the exact torque specification in the owner's manual or service manual for your specific vehicle, as trims and wheel options can influence the specification.
Summary
For the 2013 Honda CR-V, lug nuts are standard M12 x 1.5 with a 19 mm hex, five nuts per wheel, on a 5x114.3 mm bolt pattern, using a 60-degree conical seat. Target a tightening torque of about 80 ft-lbs (108 Nm) in a star pattern, and re-check after bedding in. When replacing hardware, consult the owner's manual or a dealership VIN-specific guide to confirm exact specs for your vehicle’s trim and wheels.
What size of socket for to remove lug nuts Honda?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
| Odyssey | 2003-2020 | 21 mm |
| Ridgeline | 2006-2020 | 21 mm |
What size socket for 2013 Honda CR-V lug nuts?
19mm socket
What is the lug nut socket size for a 2013 Honda CRV? The factory lug nuts on a 2013 Honda CRV require a 19mm socket. So if you have the original lug nuts, you'll need a 19mm socket to remove and install them.
Are all lug nuts 21mm?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size socket for Honda CR-V lug nuts?
Honda CRV Lug Nuts Sizes
The lug nuts on most Honda CR-V models from 1997-2025 are 12×1.5 mm with a torque spec of 80 ft-lbs. This means you'll need a 19mm socket to remove or install the lug nuts.