The lug nuts on a 2007 Honda Pilot are M12 x 1.5 thread size, used on a 6-lug pattern. A 19 mm socket is commonly used to remove them, though you should verify the exact size on your wheels before servicing.
This question matters for anyone replacing wheels, changing tires, or performing routine maintenance. The 2007 Pilot’s wheel setup uses six studs that secure the wheel to the hub, and the correct lug nuts must match the wheel’s hole pattern and seat type to ensure a safe, secure fit. Aftermarket wheels or spacers can alter the required dimensions, so it’s important to confirm the precise size for your specific setup.
Lug Nut Specifications
Below are the core specifications you should know when servicing or replacing lug fasteners on a 2007 Pilot.
- Thread size: M12 x 1.5 (12 mm diameter, 1.5 mm thread pitch)
- Lug count: 6-lug pattern
- Seat type: Conical (60-degree) seat
- Typical socket size: 19 mm, though some wheels may require 21 mm; always verify on your vehicle
Having the correct specifications helps ensure proper seating, torque application, and long-term wheel safety. Always double-check the nut size before installation or removal to avoid damaging the studs or wheel.
Verification and Care
To confirm the exact lug nut size for your vehicle, reference the wheel manufacturer’s specs, the Honda Pilot’s service manual, or consult a qualified parts professional. If you’re unsure, bring a sample lug nut or wheel to a parts retailer to match the size precisely.
How to verify your exact size
- Check the owner's manual or the wheel specification plate for the recommended lug nut size and seat type. - For aftermarket wheels, consult the wheel or lug nut manufacturer to verify the correct size and thread pitch. - If you have access to a torque wrench and lug wrench, compare them against the nut flats to determine the correct hex size before use.
Summary
In summary, the 2007 Honda Pilot uses six M12 x 1.5 lug nuts with a conical seat. The standard socket size is typically 19 mm, but always verify on your specific wheels, as aftermarket parts can differ. Accurate verification helps ensure safe installation and removal and protects wheels and studs from damage.