There isn’t a single universal size for Honda center caps—the diameter varies by wheel model and year.
Wheels across Honda’s lineup—from Civics and Accords to CR-Vs and Pilots, including aftermarket OEM-equivalent rims—use different center-cap diameters. To source the right cap, you’ll need to identify or measure your wheel’s model and size.
Common center cap sizes on Honda wheels
Center caps are most often found in a few standard diameters on Honda wheels. The sizes listed below are the ones you are most likely to encounter on recent OEM wheels, with approximate inch equivalents for reference.
- 56 mm (about 2.20 inches)
- 60 mm (about 2.36 inches)
- 62 mm (about 2.44 inches)
Because wheel designs and generations vary, the exact cap size for your vehicle may differ. When replacing, verify the size against the part number or by direct measurement of the cap opening.
How to determine your Honda center cap size
To ensure a proper fit, follow these steps to identify your specific center-cap size or part number.
- Identify your wheel type and model year (OEM Honda wheels vs. aftermarket replicas).
- Remove the center cap and measure the diameter across the cap opening or the cap itself using a ruler or caliper.
- Check for a part number on the back of the cap or consult Honda’s parts catalog for your wheel model and year to confirm the exact size.
- If you’re unsure, bring the wheel or cap to a dealership or reputable auto parts store to verify compatibility before purchasing.
With the exact measurement or part number, you can source the correct center cap size—OEM or aftermarket—that fits securely and maintains the wheel’s appearance.
Summary
Honda center caps do not have a single universal size. Sizes vary by wheel design, model, and year, with common diameters around 56 mm, 60 mm, and 62 mm. To avoid mismatches, identify your wheel model or measure the cap opening, and consult official parts catalogs or a dealer when in doubt. Accurate sizing ensures a proper fit and a clean finish on your Honda wheels.