The typical driver-side blade length on most Dodge Challenger models is 24 inches with a 19-inch blade on the passenger side.
The exact sizes can vary by model year and trim. To be certain, consult your vehicle’s owner’s manual or a trusted parts catalog for your year and trim level.
Common sizes by generation
First generation (2008–2014)
The following sizes apply to the majority of Challengers in this era.
- Driver blade length: 24 inches
- Passenger blade length: 19 inches
Note: Minor variations can occur by trim or production year; always verify against your specific vehicle.
Second generation (2015–2023/2024)
For the newer generation, the same general sizing is commonly used, though there can be occasional differences by trim or packaging.
- Driver blade length: 24 inches
- Passenger blade length: 19 inches
Always confirm the exact sizes for your exact build year and trim since some configurations may differ.
Exceptions and how to verify
If you want to be absolutely sure you have the correct blades, use these verification steps.
- Check the owner’s manual or the official Dodge parts catalog for your year and trim.
- Inspect the current blades for length markings printed on them.
- If in doubt, measure the blades with a tape measure from end to end when exposed on the car.
- Ask a parts retailer or your dealership to confirm the exact sizes for your VIN.
- When replacing, consider replacing both blades to ensure even performance and fit.
Following these steps will help you ensure you select the correct blade lengths for any Challenger configuration.
Summary
Across most Dodge Challenger models, the standard front-wiper setup is a 24-inch driver-side blade and a 19-inch passenger-side blade. While this pairing covers the vast majority of years, always verify using the owner's manual, vehicle markings, or a trusted parts catalog to account for any generation- or trim-specific variation. If in doubt, consult a retailer with your exact year and trim to confirm before purchasing.