The recommended oil for most INFINITI QX60 models is 0W-20 full-synthetic motor oil. Always verify the exact specification for your year in the owner’s manual.
This article explains the current guidance for the QX60, how it may vary by generation and climate, and provides practical steps for choosing, buying, and changing the oil on your vehicle. It’s designed to help you keep the QX60’s V6 engine performing reliably across model years.
Current generation guidance (2022–present)
The 2022 redesign of the QX60 uses a 3.5L V6 with a 9-speed automatic and generally requires 0W-20 full-synthetic motor oil. The typical capacity is around 5.4 quarts with a new filter. The oil should meet modern API SN Plus or newer specifications and align with Infiniti/Nissan service specifications. If your owner’s manual specifies a different viscosity, follow that exact guidance.
Below is a quick guide to the recommended oil types for the current generation.
- 0W-20 full-synthetic motor oil that meets API SN Plus or newer and ILSAC GF-5 (or newer) specifications, and Infiniti/Nissan service requirements listed in your manual.
- Oil capacity typically around 5.4 quarts with filter; verify the exact capacity in your vehicle’s manual or service label.
- Brand options include major synthetic oil brands (Mobil 1, Castrol, Valvoline, Pennzoil, etc.) as long as the oil is 0W-20 synthetic and meets the above specs.
Using the correct oil helps optimize efficiency, cold-start performance, and engine protection for the QX60’s V6 powertrain.
Year-by-year notes and alternate scenarios
Year-by-year oil guidance
For the QX60’s first generation (roughly 2013–2021), Infiniti/Nissan manuals commonly recommended synthetic oils such as 5W-30 for many V6 engines. The current generation (2022–present) shifted toward 0W-20 as the standard viscosity. Climate, driving style, and regional fuel formulations can influence the best viscosity, so always check your exact year and market guidance in the owner’s manual.
In all cases, use a full-synthetic oil that meets API SN Plus or newer and the required Infiniti/Nissan specification. If 0W-20 is not available in your region, use the viscosity permitted by your manual (for example, 5W-30) only if explicitly allowed by the manual. Do not deviate from the manufacturer’s guidance unless it is documented.
Practical steps for selecting and maintaining oil
To help you implement the guidance, here are practical steps for selecting and changing the oil in your QX60.
- Check the owner’s manual or consult a certified Infiniti dealer to confirm the exact viscosity and specification for your year and engine variant.
- Choose a high-quality full-synthetic oil that meets API SN Plus or newer and ILSAC GF-5 or newer, and satisfies the Infiniti/Nissan service specification listed in your manual.
- For the current generation, use 0W-20 unless your manual explicitly allows an alternative viscosity.
- Install a compatible oil filter and replace the drain plug gasket if needed during the oil change.
- Keep a record of the oil type, brand, and change interval, and adhere to the service schedule based on normal or severe driving conditions.
Adhering to these steps helps protect the QX60’s engine and maintain optimal performance across model years.
Summary
Across the Infiniti QX60 lineup, the current generation (2022–present) typically calls for 0W-20 full-synthetic motor oil, with an approximate capacity of 5.4 quarts including the filter. Always confirm the exact specification and capacity in your vehicle’s owner’s manual, as early models and regional variations may differ (some earlier years used 5W-30). Use a reputable synthetic oil that meets API SN Plus and ILSAC GF-5 or newer, and ensure it aligns with Infiniti/Nissan service specifications. Regular, properly serviced oil changes are essential to sustain the QX60’s performance and longevity.