The right oil filter depends on the Camry’s engine, but the standard Toyota option for many 2006 Camry models is part number 04152-YZZA1. Always confirm by engine code or VIN before purchase.
In 2006, the Camry offered two gasoline engines: a 2.4-liter four-cylinder (2AZ-FE) and a 3.0-liter V6 (1MZ-FE). Because filter part numbers can vary between engines, it's important to verify which engine your car uses before buying.
How to identify the right filter for your Camry
The following steps help you determine the correct filter when you shop or pull the current filter from your car.
- Check the owner's manual or service booklet for the recommended filter part number.
- Identify the engine code under the hood (2AZ-FE for the 2.4L or 1MZ-FE for the 3.0L) to confirm which filter family applies.
- If buying at a parts store, provide your VIN or engine code to the associate so they can pull the exact fitment.
Using these steps ensures you pick the correct oil filter for your Camry, reducing the risk of improper fitment or oil leaks.
OEM and common aftermarket options
For the 2006 Camry, the most common OEM option is Toyota's 04152-YZZA1 oil filter. Many reputable aftermarket brands maintain cross-references to this Toyota part number, allowing you to use a brand you trust.
- OEM: 04152-YZZA1 (Toyota Genuine Part)
- Aftermarket brands that typically reference this part number include Fram, Wix, Bosch, Purolator, Denso, and Mann-Filter
Always verify the exact cross-reference with the brand's catalog or by providing your vehicle details to the parts seller.
What to buy today
Once you know your engine (2AZ-FE or 1MZ-FE) and have confirmed the applicable part number, you can order either the OEM Toyota filter or a trusted aftermarket alternative. Ensure you also pick up the correct O-ring/gasket size if your kit doesn't include it.
Summary
The right oil filter for a 2006 Toyota Camry depends on the engine. Most cars with the 2.4L four-cylinder use Toyota part 04152-YZZA1, and aftermarket brands commonly offer cross-references to this number. Verify engine code or VIN when purchasing, and consult the owner's manual or a trusted parts supplier to confirm fitment.
What type of oil filter for Toyota Camry?
The Toyota Camry oil filter type could be either spin-on or cartridge-style, depending on your engine and the year.
What oil filter does a 2006 Toyota Camry take?
90915-YZZG2) Genuine Toyota original equipment oil filter for your Toyota vehicle. Engineered and specified by Toyota, this is the same filter as that which would be installed by your dealer.
What size oil filter does a 2006 Toyota Corolla take?
8L L4 Gas Oil Filter.
What type of oil does a 2006 Toyota Camry use?
5W-30
Oil Grade: API*
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 4 quarts (with filter). After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |