The 2019 Corolla LE (gasoline version) uses Toyota’s genuine oil filter, typically part number 04152-YZZA1. This is the standard filter for the 1.8-liter engine; verify compatibility for hybrids or region-specific models with your VIN or dealer.
Official part number and compatibility
These details pertain to the non-hybrid 1.8L gasoline engine found in most North American 2019 Corolla LE models. Always confirm the exact part for your car using your VIN if you’re unsure about hybrids or regional differences.
- Toyota Genuine Oil Filter: 04152-YZZA1 (1.8L gasoline engine in the 2019 Corolla LE).
- Hybrid variants or regional specifications may use a different filter; check the official parts catalog or with a Toyota dealer using your VIN.
- If you prefer aftermarket, select a filter that matches a 3/4-16 thread and the same cartridge dimensions, and ensure it includes an anti-drain-back valve and is rated for 0W-20 synthetic oil.
In practice, many reputable aftermarket filters will fit the 1.8L engine as long as they meet the same thread size and filtering specifications. Always verify packaging and cross-reference with Toyota’s part database or your dealer.
Notes for hybrids and regional variations
The 2019 Corolla Hybrid uses a different powertrain and may require a distinct filter from the gas version. If your LE is a Hybrid or you’re in a region with different specifications, confirm the correct part number via Toyota’s official parts catalog or your local dealer using your vehicle’s VIN.
How to replace the oil filter: quick guidance
Before you begin, gather the necessary materials: the correct oil filter (04152-YZZA1 for the gas 1.8L), the proper grade of oil (Toyota/recommended 0W-20 for the 1.8L gas engine), an oil drain pan, a new drain plug washer if needed, a filter wrench or hand tool, and a funnel.
- Park on level ground and allow the engine to cool. Place the drain pan under the oil pan.
- Drain the old oil by removing the drain plug and letting it empty completely; reinstall the drain plug with a new washer if provided.
- Locate the oil filter, remove the old filter, and wipe the mounting surface clean.
- Apply a light coat of new oil to the gasket on the new filter and screw it on by hand until snug; tighten an additional 3/4 turn unless the filter specifies a different torque.
- Refill the engine with the recommended oil quantity and type; check the oil level with the dipstick and adjust as needed.
- Start the engine, check for leaks, and reset the maintenance or oil-change indicator if applicable.
Dispose of the used oil and filter responsibly at a recycling center or auto shop. Always consult your owner’s manual for exact capacities and torque values tailored to your vehicle.
Summary
For the 2019 Toyota Corolla LE with the 1.8L gasoline engine, use Toyota’s official oil filter part number 04152-YZZA1. If you own a Hybrid or operate in a different region, verify the correct filter with your VIN or dealer. Aftermarket filters can be compatible if they match the same thread size and dimensions, but always confirm compatibility. Regular oil and filter changes help maintain engine performance and longevity.