For the 2019 Honda Pilot with the 3.5L V6, the recommended oil filter is the Honda OEM part 15400-PLM-A02. This guide explains the filter type, official part numbers, and how to confirm the right part for your VIN.
Overview of the engine and filter type
The Pilot’s 3.5L V6 uses a standard spin-on oil filter that screws into the engine’s lubrication system. The filter is designed to trap contaminants and maintain oil flow under operating conditions. For most 2019 Pilots, Honda’s OEM filter 15400-PLM-A02 is the correct replacement.
Official part numbers and compatibility
Identifying the right filter relies on official part numbers and vehicle configuration. The following options cover common configurations for the 2019 Pilot with the 3.5L engine:
- 15400-PLM-A02 — Honda OEM oil filter typically used on 2019 Pilot with the 3.5L V6.
- 15400-PLM-A01 — An earlier revision that may apply to some older 3.5L installations; verify compatibility with your specific vehicle.
Always confirm the exact part number using your VIN or by inspecting the current filter. When in doubt, the 15400-PLM-A02 is the standard recommendation for most 2019 Pilots.
Aftermarket options and cross-references
If you prefer aftermarket filters, many brands offer compatible products that fit the 3.5L Honda engine. When selecting, ensure the filter specifies compatibility with Honda 3.5L V6 engines and matches the engine’s thread size and gasket diameter. A VIN-based lookup or retailer’s compatibility tool can help confirm fitment.
- Brands such as Wix, Bosch, Purolator, and Mobil 1 offer equivalent filters for Honda 3.5L engines; search using the vehicle year, make, model, and engine to find a match.
- Check that the replacement includes the appropriate gasket and anti-drainback valve for a proper seal.
OEM filters are generally the simplest choice for warranty and reliability, but well-known aftermarket options can perform equally well when correctly matched.
Installation tips
Before attempting replacement, prepare the work area and gather the necessary tools. Below are essential steps to guide the installation:
- Warm up the engine briefly, then turn it off and secure the vehicle on level ground.
- Place a drain pan underneath, remove the old oil drain plug, and drain used oil.
- Remove the old oil filter, wipe the mounting surface, and apply a light coat of fresh oil to the gasket on the new filter.
- Install the new filter by hand until snug, then give it a quarter-turn more (do not overtighten).
- Replace the drain plug, refill with the recommended oil amount, and run the engine to check for leaks. Recheck the oil level and top off if needed.
These steps help ensure a proper seal and safe operation after an oil change.
Summary
The 2019 Honda Pilot’s primary oil filter for the 3.5L V6 is the Honda OEM 15400-PLM-A02. An earlier revision, 15400-PLM-A01, may appear on some builds, so VIN-based verification is recommended. Aftermarket filters can be used if they match Honda’s specifications, but OEM ensures compatibility and warranty support. Always replace the filter with a new gasket and follow proper oil-change procedures.