The 2019 Honda Fit uses a cartridge-style oil filter (not a spin-on canister). The cartridge, along with its O-ring, is replaced during an oil change. The exact part number depends on the market, but in North America the OEM cartridge filter is commonly listed in Honda catalogs as the cartridge filter for the 1.5L engine.
Beyond identifying the filter type, this article explains how to confirm the precise part for your vehicle, where to buy reliable replacements, and how to install it correctly. The Fit’s 1.5-liter engine (L15B) relies on a cartridge-style filter, so knowing the right kit and how to verify it can prevent mismatches during service.
Filter type and part numbers
Before shopping, note these key facts about the 2019 Fit’s oil filter system.
- Cartridge-style oil filter (not a traditional screw-on filter). The filter element is replaced inside a housing, along with the O-ring.
- The replacement kit typically includes the cartridge element and the O-ring; some kits also include a new housing seal or gasket as needed.
- In North America, the OEM cartridge filter is commonly cataloged as a Honda oil filter cartridge (the exact numeric part can vary by model year and market; many listings reference a 15400-series cartridge). Always verify the precise number for your VIN.
- Quality aftermarket cartridge filters from reputable brands are available, but ensure the product is specifically labeled for the 1.5L L15B engine and cartridge-type configuration.
- If you’re uncertain, rely on the dealer or a parts catalog by VIN to confirm the correct part number and compatibility.
In short, the Fit uses a cartridge-style oil filter, and the official numbers can vary by region; always confirm with a VIN-aware parts source to avoid an incorrect fit.
How to verify the exact part for your vehicle
To ensure you’re purchasing the correct cartridge filter for your 2019 Fit, follow these steps.
- Gather your vehicle’s VIN and engine information (the 1.5L L15B engine is standard in this model year).
- Check the owner’s manual or service booklet for the recommended filter type and part numbers for your market.
- Use Honda’s official Parts Catalog or a reputable dealer portal and enter the VIN to pull the exact oil filter cartridge part number.
- Cross-check any aftermarket listing to confirm it specifies a cartridge-style filter for the 2019 Fit’s 1.5L engine; avoid generic or spin-on filters unless explicitly compatible.
- Inspect the packaging or product description to confirm it includes the cartridge element and O-ring necessary for installation.
Following these steps helps ensure compatibility and avoids ordering the wrong filter.
Where to buy and installation tips
Reliable sources for the correct cartridge filter and practical tips for installing it include:
- Honda dealership parts department or official online parts portal.
- Reputable auto parts chains or online retailers that specify “cartridge oil filter” for the 2019 Honda Fit 1.5L.
- General automotive retailers that provide VIN-based lookup to confirm exact fitment.
Installation and maintenance tips:
- Ensure you have a new O-ring and, if included, a new housing seal. Lubricate the O-ring with a little clean engine oil before installation.
- Replace the filter cartridge only; avoid attempting to service a spin-on filter on this model, as it uses a cartridge in a housing.
- Follow the manufacturer’s oil change procedure for refilling and checking leaks; reset or clear the maintenance minder after the service.
- Dispose of used oil and filter according to local regulations.
For best results, install the cartridge filter and O-ring carefully, verify there are no leaks after starting the engine, and consult the manual or a technician if you notice any issues.
Summary
The 2019 Honda Fit takes a cartridge-style oil filter (not a spin-on). The exact OEM cartridge part number varies by market, with North American catalogs typically listing a cartridge filter for the 1.5L engine. To ensure you buy the correct part, verify with your VIN via the official Honda parts catalog or your dealership, and consider a reputable aftermarket cartridge filter if it matches the model specifications. Always replace the filter cartridge and its O-ring during an oil change and follow installation best practices.